[835] | 1 | % Copyright (c) 2006-2008 Rice University |
---|
[560] | 2 | % All Rights Reserved |
---|
| 3 | % This code is covered by the Rice-WARP license |
---|
| 4 | % See http://warp.rice.edu/license/ for details |
---|
| 5 | % |
---|
| 6 | % 'sysgen2opb' is a MATLAB script which converts a model built in Xilinx |
---|
| 7 | % System Generator into an OPB-compliant peripheral for use with the |
---|
| 8 | % embedded PowerPCs. The script replaces all the model's From/To Registerse |
---|
| 9 | % with memory mapped registers. It also creates the necessary address |
---|
| 10 | % decode logic and a C header file with the resulting register map. |
---|
| 11 | % |
---|
| 12 | % In addition, there is an option that can be turned on/off: |
---|
| 13 | % Shared Memory Extension Script - This script adds in an option to allow |
---|
| 14 | % the usage of Shared Memory. This script requires the usage of Dual Port |
---|
| 15 | % RAM's. |
---|
| 16 | % |
---|
| 17 | % This script is only supported for Xilinx System Generator 8.1 and 8.2 |
---|
| 18 | % |
---|
| 19 | % To run the script, type the following on the Matlab command line: |
---|
| 20 | % sysgen2opb('yourModelName', 'yourSMChoice') |
---|
| 21 | % |
---|
| 22 | % Replace 'yourModelName' with your Simulink model's name |
---|
| 23 | % without the .mdl extension. |
---|
| 24 | % |
---|
| 25 | % Replace 'yourSMChoice' with one of the following: |
---|
| 26 | % 1. 'smon' which will turn on the Shared Memory Extension Script |
---|
| 27 | % 2. 'smoff' which will turn off the Shared Memory Extension Script |
---|
| 28 | % |
---|
| 29 | % If you want to run the original script that utilizes From/To Registers |
---|
| 30 | % with no shared memory extension, run: sysgen2opb('yourModelName') |
---|
| 31 | |
---|
| 32 | function sysgen2opb(sys, varargin) |
---|
| 33 | warning off; |
---|
| 34 | |
---|
| 35 | % Run the model to see if there are any errors in the model |
---|
| 36 | try |
---|
| 37 | sim(sys, 0) |
---|
| 38 | catch |
---|
| 39 | display(['Error: Simulating the model resulted in error. Please check your model and initialization script.']); |
---|
| 40 | return; |
---|
| 41 | end |
---|
| 42 | |
---|
| 43 | % Base Address is always zero due to relocatable memory |
---|
| 44 | base = 0; |
---|
| 45 | |
---|
| 46 | appendString = ''; |
---|
| 47 | |
---|
| 48 | % Look at the length of varargin to determine whether to run default |
---|
| 49 | % scripts |
---|
| 50 | if length(varargin) == 0 |
---|
| 51 | %Defult to no shared memory |
---|
| 52 | smChoice = 'smoff'; |
---|
| 53 | elseif length(varargin) == 1 |
---|
[567] | 54 | smChoice = char(varargin(1)); |
---|
[560] | 55 | else |
---|
| 56 | display('Unrecognized parameters on command line.'); |
---|
| 57 | return; |
---|
| 58 | end |
---|
| 59 | |
---|
| 60 | % Find the sample time period from the System Generator block |
---|
| 61 | sysgenblock = find_system(sys, 'block_type', 'sysgen'); |
---|
| 62 | if length(sysgenblock) == 0 |
---|
| 63 | display(['Error: Please include a System Generator block.']); |
---|
| 64 | return; |
---|
| 65 | elseif length(sysgenblock) > 1 |
---|
| 66 | display(['Error: Please only include one System Generator block in model.']); |
---|
| 67 | return; |
---|
| 68 | else |
---|
| 69 | sysgenperiod = get_param(sysgenblock, 'simulink_period'); |
---|
| 70 | sysgenperiod = mat2str(cell2mat(sysgenperiod)); |
---|
| 71 | end |
---|
| 72 | |
---|
| 73 | % Load the model. Inform the user if it fails to load (ie: the model does |
---|
| 74 | % not exist) |
---|
| 75 | try |
---|
| 76 | load_system(sys); |
---|
| 77 | catch |
---|
| 78 | display(['Error: System ' sys ' does not exist']); |
---|
| 79 | return; |
---|
| 80 | end |
---|
| 81 | |
---|
| 82 | % Check smChoice |
---|
| 83 | if ~(strcmp(smChoice, 'smon') | strcmp(smChoice, 'smoff')) |
---|
| 84 | display(['Error smChoice input ''' smChoice ''' does not exist. Please use ''smon'' or ''smoff'' as your inputs.']); |
---|
| 85 | return; |
---|
| 86 | end |
---|
| 87 | |
---|
| 88 | |
---|
| 89 | % Find the current sysgen version |
---|
| 90 | try |
---|
| 91 | version = xlVersion; |
---|
| 92 | catch |
---|
| 93 | display('Error: Sysgen is not found!'); |
---|
| 94 | return; |
---|
| 95 | end |
---|
| 96 | |
---|
| 97 | if length(version) >= 1 |
---|
| 98 | % The latest version is the first one in the cell |
---|
| 99 | version = version{1}; |
---|
| 100 | % Get the first digit of the string array |
---|
| 101 | version = str2num(version(1:3)); |
---|
| 102 | else |
---|
| 103 | display('Error: Sysgen is not found!'); |
---|
| 104 | return; |
---|
| 105 | end |
---|
| 106 | |
---|
[598] | 107 | if ((version == 8.1) | (version == 8.2) | (version == 9.1)) |
---|
[560] | 108 | % Find the From/To Registers |
---|
| 109 | gatewaysInCheck = find_system(sys, 'LookUnderMasks', 'all', 'FollowLinks', 'on', 'block_type', 'fromreg'); |
---|
| 110 | gatewaysOutCheck = find_system(sys, 'LookUnderMasks', 'all', 'FollowLinks', 'on', 'block_type', 'toreg'); |
---|
| 111 | else |
---|
| 112 | display(['Error: Version ' version ' is not supported.']); |
---|
| 113 | return; |
---|
| 114 | end |
---|
| 115 | |
---|
| 116 | % Check how many Gateways we have |
---|
| 117 | numberGateways = length(gatewaysInCheck) + length(gatewaysOutCheck); |
---|
| 118 | if numberGateways > 450 |
---|
| 119 | display('Error: The script only allows a max of 450 From/To Registers'); |
---|
| 120 | return; |
---|
| 121 | elseif numberGateways == 0 |
---|
| 122 | display('Error: The script needs From/To Regs within the model'); |
---|
| 123 | return; |
---|
| 124 | end |
---|
| 125 | |
---|
| 126 | % Check to see if we have a converted model by checking if we have the |
---|
| 127 | % Memory Mapped IO |
---|
| 128 | % If we do, inform the user and exit the script |
---|
| 129 | MemoryMappedIO = find_system(sys, 'LookUnderMasks', 'all', 'FollowLinks', 'on', 'BlockType', 'SubSystem', 'Name', 'Memory Mapped I_O'); |
---|
| 130 | if length(MemoryMappedIO) > 0 |
---|
| 131 | display('You already have converted this design to a peripheral.'); |
---|
| 132 | display('Please get rid of the Memory Mapped I_O block and make sure') |
---|
| 133 | display('your gateways are all still in place before trying again.'); |
---|
| 134 | return; |
---|
| 135 | end |
---|
| 136 | |
---|
| 137 | % Try saving an unconverted backup |
---|
| 138 | try |
---|
| 139 | save_system(sys,[sys '_unconverted_backup']); |
---|
| 140 | catch |
---|
| 141 | % There's a system with that name that's opened right now |
---|
| 142 | % Close that system without saving |
---|
| 143 | close_system([sys '_unconverted_backup'], 0); |
---|
| 144 | |
---|
| 145 | % Save the backup system |
---|
| 146 | save_system(sys,[sys '_unconverted_backup']); |
---|
| 147 | end |
---|
| 148 | close_system([sys '_unconverted_backup']); |
---|
| 149 | |
---|
| 150 | % Load the system |
---|
| 151 | load_system(sys); |
---|
| 152 | save_system(sys, sys, 'BreakLinks'); |
---|
| 153 | |
---|
| 154 | % Try loading a local copy from the skeleton model |
---|
| 155 | % If it is not there, load it from the toolbox |
---|
| 156 | spm = 'skeleton_periph_model'; |
---|
| 157 | try |
---|
| 158 | load_system(spm); |
---|
| 159 | catch |
---|
| 160 | load_system([matlabroot '\toolbox\WARP\' spm]); |
---|
| 161 | end |
---|
| 162 | |
---|
| 163 | %Find Sybsystems and correct all the names |
---|
| 164 | subsystems = find_system(sys,'LookUnderMasks', 'all', 'FollowLinks', 'on', 'BlockType', 'SubSystem'); |
---|
| 165 | %First we need to look for duplicate names |
---|
| 166 | for c=1:length(subsystems) |
---|
| 167 | subsysName = subsystems{c}; |
---|
| 168 | shortName = get_param(subsysName, 'Name'); |
---|
| 169 | parent = get_param(subsysName, 'Parent'); |
---|
| 170 | compName = [shortName ' ']; |
---|
| 171 | % Make sure that we do not edit the name of the System Generator |
---|
| 172 | if ~strcmp(compName(1:17), ' System Generator') |
---|
| 173 | idx=0; %appended to the end of a duplicate name |
---|
| 174 | for d=c+1:length(subsystems) |
---|
| 175 | subsysName2 = subsystems{d}; |
---|
| 176 | shortName2 = get_param(subsysName2,'Name'); |
---|
| 177 | parent2 = get_param(subsysName2, 'Parent'); |
---|
| 178 | if strcmp(parent, parent2) & strcmp(cleanName(shortName), cleanName(shortName2)) |
---|
| 179 | set_param(subsysName2,'Name', [shortName2 '_' int2str(idx)]); |
---|
| 180 | idx=idx+1; |
---|
| 181 | subsystems = find_system(sys,'LookUnderMasks','all','BlockType','SubSystem')'; |
---|
| 182 | end |
---|
| 183 | end |
---|
| 184 | end |
---|
| 185 | end |
---|
| 186 | |
---|
| 187 | % Update the Subsystem list |
---|
| 188 | subsystems = find_system(sys, 'LookUnderMasks', 'all', 'FollowLinks', 'on', 'BlockType', 'SubSystem'); |
---|
| 189 | %Now for Subsystems with spaces, we want to clean up the name |
---|
| 190 | for c=length(subsystems):-1:1 |
---|
| 191 | subsysName = subsystems{c}; |
---|
| 192 | shortName = get_param(subsysName, 'Name'); |
---|
| 193 | compName = [shortName ' ']; |
---|
| 194 | % Make sure that we do not edit the name of the System Generator |
---|
| 195 | if ~strcmp(compName(1:17), ' System Generator') |
---|
| 196 | set_param(subsysName, 'Name', cleanName(shortName)); |
---|
| 197 | end |
---|
| 198 | end |
---|
| 199 | |
---|
| 200 | if strcmp(smChoice, 'smon') |
---|
| 201 | % Define the variables that will be |
---|
| 202 | % later used for shared memory extension |
---|
| 203 | dpramWOAddr={}; |
---|
| 204 | dpramWOAddrIndex = 0; |
---|
| 205 | dpramWODataI={}; |
---|
| 206 | dpramWODataIIndex = 0; |
---|
| 207 | dpramWOWE={}; |
---|
| 208 | dpramWOWEIndex = 0; |
---|
| 209 | dpramROAddr={}; |
---|
| 210 | dpramROAddrIndex = 0; |
---|
| 211 | dpramRODataO={}; |
---|
| 212 | dpramRODataOIndex = 0; |
---|
| 213 | |
---|
| 214 | % dpramROIndex will be used to determine the number of dpram Read-only's |
---|
| 215 | % This will be used to determine whether we need a delay of one within |
---|
| 216 | % the mem_if_out |
---|
| 217 | dpramROIndex = 0; |
---|
| 218 | |
---|
| 219 | % maxdpram will be used to determine how many shared memory blocks we |
---|
| 220 | % can have |
---|
| 221 | binBaseAddress = dec2bin(base); |
---|
| 222 | try |
---|
| 223 | maxdpram = 15 - bin2dec(binBaseAddress(13:16)); |
---|
| 224 | catch |
---|
| 225 | maxdpram = 15; |
---|
| 226 | end |
---|
| 227 | |
---|
| 228 | % dpram will hold the list of all dual port RAM's |
---|
| 229 | dpram = find_system(sys,'LookUnderMasks', 'all', 'FollowLinks', 'on', 'block_type', 'dpram'); |
---|
| 230 | |
---|
| 231 | % dpramWORO will hold the list of all WO, RO dual port RAM's |
---|
| 232 | dpramWORO={}; |
---|
| 233 | dpramWOROidx = 0; |
---|
| 234 | for c=1:length(dpram) |
---|
| 235 | dpramName = dpram{c}; |
---|
| 236 | compName = [get_param(dpramName, 'Name') ' ']; |
---|
| 237 | |
---|
| 238 | % Delete all broken lines |
---|
| 239 | brokenlines = find_system(sys,'LookUnderMasks', 'all', 'FollowLinks', 'on', 'FindAll', 'on', 'type', 'line', 'SrcBlockHandle', -1); |
---|
| 240 | delete_line(brokenlines); |
---|
| 241 | brokenlines = find_system(sys,'LookUnderMasks', 'all', 'FollowLinks', 'on', 'FindAll', 'on', 'type', 'line', 'DstBlockHandle', -1); |
---|
| 242 | delete_line(brokenlines); |
---|
| 243 | |
---|
| 244 | if strcmp(compName(1:5), 'SMWO_') | strcmp(compName(1:5), 'SMRO_') |
---|
| 245 | dpramWOROidx = dpramWOROidx + 1; |
---|
| 246 | if dpramWOROidx > maxdpram |
---|
| 247 | display(['Error: We are allowed a total of ' num2str(maxdpram) ' dual port RAMS that are read-only/write-only.']); |
---|
| 248 | return; |
---|
| 249 | end |
---|
| 250 | |
---|
| 251 | dpramWORO{dpramWOROidx} = [get_param(dpramName, 'Name') '_sm' num2str(dpramWOROidx - 1)] ; |
---|
| 252 | |
---|
| 253 | DpramPortHandles = get_param(dpramName, 'PortHandles'); |
---|
| 254 | |
---|
| 255 | ports = [DpramPortHandles.Inport(4), DpramPortHandles.Inport(5), DpramPortHandles.Inport(6), DpramPortHandles.Outport(2)]; |
---|
| 256 | |
---|
| 257 | SrcBlockHandleAddr = get_param(get_param(ports(1), 'Line'), 'SrcBlockHandle'); |
---|
| 258 | SrcBlockHandleDataI = get_param(get_param(ports(2), 'Line'), 'SrcBlockHandle'); |
---|
| 259 | SrcBlockHandleWE = get_param(get_param(ports(3), 'Line'), 'SrcBlockHandle'); |
---|
| 260 | |
---|
| 261 | |
---|
| 262 | AddrName = get_param(SrcBlockHandleAddr, 'Name'); |
---|
| 263 | CompAddrName = [AddrName ' ']; |
---|
| 264 | AddrFullName = [get_param(SrcBlockHandleAddr, 'Parent') '/' AddrName]; |
---|
| 265 | if ~strcmp(get_param(SrcBlockHandleAddr, 'block_type'), 'gatewayin') |
---|
| 266 | display(['A GatewayIn is needed in order to connect to the addrb inport of the dpram ' dpramName '.']); |
---|
| 267 | return; |
---|
| 268 | end |
---|
| 269 | if ~strcmp(get_param(SrcBlockHandleAddr, 'arith_type'), 'Unsigned') | (str2num(get_param(SrcBlockHandleAddr, 'n_bits')) > 14) | (str2num(get_param(SrcBlockHandleAddr, 'bin_pt')) > 0) |
---|
| 270 | display(['The GatewayIn ' AddrFullName ' needs to be UFix, with number of bits <= 14, and binary point at 0.']); |
---|
| 271 | return; |
---|
| 272 | end |
---|
| 273 | orientationAddr = get_param(SrcBlockHandleAddr, 'Orientation'); |
---|
| 274 | placeAddr = get_param(SrcBlockHandleAddr, 'position'); |
---|
| 275 | parentAddr = get_param(SrcBlockHandleAddr, 'Parent'); |
---|
| 276 | fromAddr = [parentAddr '/' cleanName(AddrName) '_sm' int2str(dpramWOROidx)]; |
---|
| 277 | fromAddrSlice = [parentAddr '/' cleanName(AddrName) '_slice_sm' int2str(dpramWOROidx)]; |
---|
| 278 | fromAddrSliceBits = get_param(SrcBlockHandleAddr, 'n_bits'); |
---|
| 279 | |
---|
| 280 | DataIName = get_param(SrcBlockHandleDataI, 'Name'); |
---|
| 281 | CompDataIName = [DataIName ' ']; |
---|
| 282 | DataIFullName = [get_param(SrcBlockHandleDataI, 'Parent') '/' DataIName]; |
---|
| 283 | orientationDataI = get_param(SrcBlockHandleDataI, 'Orientation'); |
---|
| 284 | placeDataI = get_param(SrcBlockHandleDataI, 'position'); |
---|
| 285 | parentDataI = get_param(SrcBlockHandleDataI, 'Parent'); |
---|
| 286 | fromDataI = [parentAddr '/' cleanName(DataIName) '_sm' int2str(dpramWOROidx)]; |
---|
| 287 | |
---|
| 288 | WEName = get_param(SrcBlockHandleWE, 'Name'); |
---|
| 289 | CompWEName = [WEName ' ']; |
---|
| 290 | WEFullName = [get_param(SrcBlockHandleWE, 'Parent') '/' WEName]; |
---|
| 291 | orientationWE = get_param(SrcBlockHandleWE, 'Orientation'); |
---|
| 292 | placeWE = get_param(SrcBlockHandleWE, 'position'); |
---|
| 293 | parentWE = get_param(SrcBlockHandleWE, 'Parent'); |
---|
| 294 | fromWE = [parentWE '/' cleanName(WEName) '_sm' int2str(dpramWOROidx)]; |
---|
| 295 | |
---|
| 296 | end |
---|
| 297 | |
---|
| 298 | if strcmp(compName(1:5), 'SMWO_') |
---|
| 299 | if ~strcmp(CompAddrName(1:9), 'SMWOAddr_') |
---|
| 300 | display(['The Gateway In ' AddrName ' needs to have the prefix of SMWOAddr_']); |
---|
| 301 | return; |
---|
| 302 | end |
---|
| 303 | |
---|
| 304 | %%%%% SMWOAddr %%%%%% |
---|
| 305 | % Delete the GatewayIn |
---|
| 306 | delete_block(SrcBlockHandleAddr); |
---|
| 307 | |
---|
| 308 | |
---|
| 309 | deleteSource(sys, cleanName(AddrName)); |
---|
| 310 | |
---|
| 311 | % Find the broken lines that starts from the output port of the |
---|
| 312 | % deleted GatewayIn |
---|
| 313 | brokenlines = find_system(sys,'LookUnderMasks', 'all', 'FollowLinks', 'on', 'FindAll', 'on', 'type', 'line', 'SrcBlockHandle', -1); |
---|
| 314 | |
---|
| 315 | % Find out the handle of the port and the block |
---|
| 316 | % These two handles will be used to extract more information |
---|
| 317 | DstPortHandle = get_param(brokenlines, 'DstPortHandle'); |
---|
| 318 | DstBlockHandle = get_param(brokenlines, 'DstBlockHandle'); |
---|
| 319 | |
---|
| 320 | % From DstPortHandle, we can find out what is |
---|
| 321 | % the destination port number |
---|
| 322 | if length(DstPortHandle) > 1 |
---|
| 323 | DstPortNumber = cell2mat(get_param(DstPortHandle{length(DstPortHandle)}, 'PortNumber')); |
---|
| 324 | else |
---|
| 325 | DstPortNumber = get_param(DstPortHandle, 'PortNumber'); |
---|
| 326 | end |
---|
| 327 | |
---|
| 328 | % From DstBlockHandle, we can find out what is the name of the |
---|
| 329 | % destination block |
---|
| 330 | if length(DstBlockHandle) > 1 |
---|
| 331 | DstName = get_param(DstBlockHandle{length(DstBlockHandle)}, 'Name'); |
---|
| 332 | try |
---|
| 333 | DstBlockType = get_param(DstBlockHandle{length(DstBlockHandle)}, 'block_type'); |
---|
| 334 | catch |
---|
| 335 | DstBlockType = get_param(DstBlockHandle{length(DstBlockHandle)}, 'BlockType'); |
---|
| 336 | end |
---|
| 337 | else |
---|
| 338 | DstName = get_param(DstBlockHandle, 'Name'); |
---|
| 339 | try |
---|
| 340 | DstBlockType = get_param(DstBlockHandle, 'block_type'); |
---|
| 341 | catch |
---|
| 342 | DstBlockType = get_param(DstBlockHandle, 'BlockType'); |
---|
| 343 | end |
---|
| 344 | end |
---|
| 345 | |
---|
| 346 | % Delete the borken lines |
---|
| 347 | delete_line(brokenlines); |
---|
| 348 | |
---|
| 349 | dpramWOAddrIndex = dpramWOAddrIndex + 1; |
---|
| 350 | dpramWOAddr{dpramWOAddrIndex} = fromAddr; |
---|
| 351 | %placeAddr(1,1) = placeAddr(1,1) - 60; |
---|
| 352 | placeAddr(1,3) = placeAddr(1,1) + 75; |
---|
| 353 | placeAddrSlice = placeAddr; |
---|
| 354 | placeAddrSlice(1,1) = placeAddrSlice(1,3) + 30; |
---|
| 355 | placeAddrSlice(1,3) = placeAddrSlice(1,1) + 50; |
---|
| 356 | add_block('built-in/From', fromAddr, 'GotoTag', ['SMWOAddr_' int2str(dpramWOAddrIndex - 1)], 'position', placeAddr); |
---|
[598] | 357 | if ((version == 8.1) | (version == 8.2) | (version == 9.1)) |
---|
[560] | 358 | add_block([spm '/Slice8'], fromAddrSlice, 'position', placeAddrSlice, 'nbits', fromAddrSliceBits); |
---|
| 359 | end |
---|
| 360 | |
---|
| 361 | FromName = get_param(fromAddr, 'Name'); |
---|
| 362 | FromSliceName = get_param(fromAddrSlice, 'Name'); |
---|
| 363 | set_param(fromAddr,'Orientation', orientationAddr); |
---|
| 364 | |
---|
| 365 | add_line(parentAddr, [FromName '/1' ], [FromSliceName '/1']); |
---|
| 366 | if size(DstName, 1) == 1 |
---|
| 367 | |
---|
| 368 | add_line(parentAddr, [FromSliceName '/1'], [DstName '/' int2str(DstPortNumber)]); |
---|
| 369 | %add_line(parentAddr, [FromName '/1' ], [DstName '/' int2str(DstPortNumber)]); |
---|
| 370 | else |
---|
| 371 | for i=1:size(DstName, 1) |
---|
| 372 | if ~strcmp(DstName{i}, get_param(dpramName, 'Name')) |
---|
| 373 | add_line(parentAddr, [FromName '/1'], [DstName{i} '/' mat2str(DstPortNumber(i))]); |
---|
| 374 | else |
---|
| 375 | add_line(parentAddr, [FromSliceName '/1'], [DstName{i} '/' mat2str(DstPortNumber(i))]); |
---|
| 376 | end |
---|
| 377 | end |
---|
| 378 | end |
---|
| 379 | |
---|
| 380 | %%%%% SMWODataI %%%%%% |
---|
| 381 | if ~strcmp(get_param(SrcBlockHandleDataI, 'block_type'), 'gatewayin') |
---|
| 382 | display(['A Gateway In is needed in order to connect to the datb inport of the dpram ' dpramName '.']); |
---|
| 383 | return; |
---|
| 384 | end |
---|
| 385 | if ~strcmp(get_param(SrcBlockHandleDataI, 'n_bits'), '32') |
---|
| 386 | display(['The Xilinx block ' DataIFullName ' needs to set the number of bits to 32.']); |
---|
| 387 | return; |
---|
| 388 | end |
---|
| 389 | if ~strcmp(CompDataIName(1:10), 'SMWODataI_') |
---|
| 390 | display(['The Xilinx block ' DataIName ' needs to have a prefix of SMWODataI_']); |
---|
| 391 | return; |
---|
| 392 | end |
---|
| 393 | SMWODataIArithType = get_param(SrcBlockHandleDataI, 'arith_type'); |
---|
| 394 | SMWODataIArithType = [SMWODataIArithType ' ']; |
---|
| 395 | SMWODataIArithType = SMWODataIArithType(1:8); |
---|
| 396 | if strcmp(SMWODataIArithType, 'Unsigned') |
---|
| 397 | fromDataIForce = [parentAddr '/' cleanName(DataIName) '_force_sm' int2str(dpramWOROidx)]; |
---|
| 398 | end |
---|
| 399 | |
---|
| 400 | % Delete the GatewayIn |
---|
| 401 | delete_block(SrcBlockHandleDataI); |
---|
| 402 | |
---|
| 403 | deleteSource(sys, cleanName(DataIName)); |
---|
| 404 | |
---|
| 405 | % Find the broken lines that starts from the output port of the |
---|
| 406 | % deleted GatewayIn |
---|
| 407 | brokenlines = find_system(sys,'LookUnderMasks', 'all', 'FollowLinks', 'on', 'FindAll', 'on', 'type', 'line', 'SrcBlockHandle', -1); |
---|
| 408 | |
---|
| 409 | % Find out the handle of the port and the block |
---|
| 410 | % These two handles will be used to extract more information |
---|
| 411 | DstPortHandle = get_param(brokenlines, 'DstPortHandle'); |
---|
| 412 | DstBlockHandle = get_param(brokenlines, 'DstBlockHandle'); |
---|
| 413 | |
---|
| 414 | % From DstPortHandle, we can find out what is |
---|
| 415 | % the destination port number |
---|
| 416 | if length(DstPortHandle) > 1 |
---|
| 417 | DstPortNumber = cell2mat(get_param(DstPortHandle{length(DstPortHandle)}, 'PortNumber')); |
---|
| 418 | else |
---|
| 419 | DstPortNumber = get_param(DstPortHandle, 'PortNumber'); |
---|
| 420 | end |
---|
| 421 | |
---|
| 422 | % From DstBlockHandle, we can find otu what is the name of the |
---|
| 423 | % destination block |
---|
| 424 | if length(DstBlockHandle) > 1 |
---|
| 425 | DstName = get_param(DstBlockHandle{length(DstBlockHandle)}, 'Name'); |
---|
| 426 | try |
---|
| 427 | DstBlockType = get_param(DstBlockHandle{length(DstBlockHandle)}, 'block_type'); |
---|
| 428 | catch |
---|
| 429 | DstBlockType = get_param(DstBlockHandle{length(DstBlockHandle)}, 'BlockType'); |
---|
| 430 | end |
---|
| 431 | else |
---|
| 432 | DstName = get_param(DstBlockHandle, 'Name'); |
---|
| 433 | try |
---|
| 434 | DstBlockType = get_param(DstBlockHandle, 'block_type'); |
---|
| 435 | catch |
---|
| 436 | DstBlockType = get_param(DstBlockHandle, 'BlockType'); |
---|
| 437 | end |
---|
| 438 | end |
---|
| 439 | |
---|
| 440 | % Delete the borken lines |
---|
| 441 | delete_line(brokenlines); |
---|
| 442 | |
---|
| 443 | dpramWODataIIndex = dpramWODataIIndex + 1; |
---|
| 444 | dpramWODataI{dpramWODataIIndex} = fromDataI; |
---|
| 445 | |
---|
| 446 | if strcmp(SMWODataIArithType, 'Unsigned') |
---|
| 447 | %placeDataI(1,1) = placeDataI(1,1) + 75; |
---|
| 448 | placeDataIForce = placeDataI; |
---|
| 449 | placeDataIForce(1,1) = placeDataIForce(1,3) + 30; |
---|
| 450 | placeDataIForce(1,3) = placeDataIForce(1,1) + 50; |
---|
| 451 | add_block('built-in/From', fromDataI, 'GotoTag', ['SMWODataI_' int2str(dpramWODataIIndex - 1)], 'position', placeDataI); |
---|
| 452 | add_block([spm '/Force8'], fromDataIForce, 'position', placeDataIForce); |
---|
| 453 | |
---|
| 454 | FromName = get_param(fromDataI, 'Name'); |
---|
| 455 | FromForceName = get_param(fromDataIForce, 'Name'); |
---|
| 456 | set_param(fromDataI, 'Orientation', orientationDataI); |
---|
| 457 | |
---|
| 458 | add_line(parentAddr, [FromName '/1' ], [FromForceName '/1']); |
---|
| 459 | if size(DstName, 1) == 1 |
---|
| 460 | |
---|
| 461 | add_line(parentAddr, [FromForceName '/1'], [DstName '/' int2str(DstPortNumber)]); |
---|
| 462 | %add_line(parentAddr, [FromName '/1' ], [DstName '/' int2str(DstPortNumber)]); |
---|
| 463 | else |
---|
| 464 | for i=1:size(DstName, 1) |
---|
| 465 | if ~strcmp(DstName{i}, get_param(dpramName, 'Name')) |
---|
| 466 | add_line(parentAddr, [FromName '/1'], [DstName{i} '/' mat2str(DstPortNumber(i))]); |
---|
| 467 | else |
---|
| 468 | add_line(parentAddr, [FromForceName '/1'], [DstName{i} '/' mat2str(DstPortNumber(i))]); |
---|
| 469 | end |
---|
| 470 | end |
---|
| 471 | end |
---|
| 472 | else |
---|
| 473 | placeDataI(1,1) = placeDataI(1,1) - 60; |
---|
| 474 | add_block('built-in/From', fromDataI, 'GotoTag', ['SMWODataI_' int2str(dpramWODataIIndex - 1)], 'position', placeDataI); |
---|
| 475 | |
---|
| 476 | FromName = get_param(fromDataI, 'Name'); |
---|
| 477 | set_param(fromDataI,'Orientation', orientationDataI); |
---|
| 478 | |
---|
| 479 | if size(DstName, 1) == 1 |
---|
| 480 | add_line(parentDataI, [FromName '/1' ], [DstName '/' int2str(DstPortNumber)]); |
---|
| 481 | else |
---|
| 482 | for i=1:size(DstName, 1) |
---|
| 483 | add_line(parentDataI, [FromName '/1'], [DstName{i} '/' mat2str(DstPortNumber(i))]); |
---|
| 484 | end |
---|
| 485 | end |
---|
| 486 | end |
---|
| 487 | |
---|
| 488 | %%%%% SMWOWE %%%%% |
---|
| 489 | if ~strcmp(get_param(SrcBlockHandleWE, 'block_type'), 'gatewayin') |
---|
| 490 | display(['A Gateway In is needed in order to connect to the web inport of the dpram ' dpramName '.']); |
---|
| 491 | return; |
---|
| 492 | end |
---|
| 493 | if ~strcmp(CompWEName(1:7), 'SMWOWE_') |
---|
| 494 | display(['The Gateway In ', WEName ' needs to have the prefix SMWOWE_']); |
---|
| 495 | return; |
---|
| 496 | end |
---|
| 497 | if ~strcmp(get_param(SrcBlockHandleWE, 'arith_type'), 'Boolean') |
---|
| 498 | display(['The GatewayIn ' WEFullName ' needs to have an Output type of Boolean.']); |
---|
| 499 | return; |
---|
| 500 | end |
---|
| 501 | |
---|
| 502 | % Delete the GatewayIn |
---|
| 503 | delete_block(SrcBlockHandleWE); |
---|
| 504 | |
---|
| 505 | deleteSource(sys, cleanName(WEName)); |
---|
| 506 | |
---|
| 507 | % Find the broken lines that starts from the output port of the |
---|
| 508 | % deleted GatewayIn |
---|
| 509 | brokenlines = find_system(sys,'LookUnderMasks', 'all', 'FollowLinks', 'on', 'FindAll', 'on', 'type', 'line', 'SrcBlockHandle', -1); |
---|
| 510 | |
---|
| 511 | % Find out the handle of the port and the block |
---|
| 512 | % These two handles will be used to extract more information |
---|
| 513 | DstPortHandle = get_param(brokenlines, 'DstPortHandle'); |
---|
| 514 | DstBlockHandle = get_param(brokenlines, 'DstBlockHandle'); |
---|
| 515 | |
---|
| 516 | % From DstPortHandle, we can find out what is |
---|
| 517 | % the destination port number |
---|
| 518 | if length(DstPortHandle) > 1 |
---|
| 519 | DstPortNumber = cell2mat(get_param(DstPortHandle{length(DstPortHandle)}, 'PortNumber')); |
---|
| 520 | else |
---|
| 521 | DstPortNumber = get_param(DstPortHandle, 'PortNumber'); |
---|
| 522 | end |
---|
| 523 | |
---|
| 524 | % From DstBlockHandle, we can find out what is the name of the |
---|
| 525 | % destination block |
---|
| 526 | if length(DstBlockHandle) > 1 |
---|
| 527 | DstName = get_param(DstBlockHandle{length(DstBlockHandle)}, 'Name'); |
---|
| 528 | try |
---|
| 529 | DstBlockType = get_param(DstBlockHandle{length(DstBlockHandle)}, 'block_type'); |
---|
| 530 | catch |
---|
| 531 | DstBlockType = get_param(DstBlockHandle{length(DstBlockHandle)}, 'BlockType'); |
---|
| 532 | end |
---|
| 533 | else |
---|
| 534 | DstName = get_param(DstBlockHandle, 'Name'); |
---|
| 535 | try |
---|
| 536 | DstBlockType = get_param(DstBlockHandle, 'block_type'); |
---|
| 537 | catch |
---|
| 538 | DstBlockType = get_param(DstBlockHandle, 'BlockType'); |
---|
| 539 | end |
---|
| 540 | end |
---|
| 541 | |
---|
| 542 | % Delete the borken lines |
---|
| 543 | delete_line(brokenlines); |
---|
| 544 | |
---|
| 545 | dpramWOWEIndex = dpramWOWEIndex + 1; |
---|
| 546 | dpramWOWE{dpramWOWEIndex} = fromWE; |
---|
| 547 | placeWE(1,1) = placeWE(1,1) - 60; |
---|
| 548 | add_block('built-in/From', fromWE, 'GotoTag', ['SMWOWE_' int2str(dpramWOWEIndex - 1)], 'position', placeWE); |
---|
| 549 | |
---|
| 550 | FromName = get_param(fromWE, 'Name'); |
---|
| 551 | set_param(fromWE,'Orientation', orientationWE); |
---|
| 552 | |
---|
| 553 | if size(DstName, 1) == 1 |
---|
| 554 | add_line(parentWE, [FromName '/1' ], [DstName '/' int2str(DstPortNumber)]); |
---|
| 555 | else |
---|
| 556 | for i=1:size(DstName, 1) |
---|
| 557 | add_line(parentWE, [FromName '/1'], [DstName{i} '/' mat2str(DstPortNumber(i))]); |
---|
| 558 | end |
---|
| 559 | end |
---|
| 560 | |
---|
| 561 | |
---|
| 562 | elseif strcmp(compName(1:5), 'SMRO_') |
---|
| 563 | dpramROIndex = dpramROIndex + 1; |
---|
| 564 | |
---|
| 565 | DstBlockHandleDataO = get_param(get_param(ports(4), 'Line'), 'DstBlockHandle'); |
---|
| 566 | |
---|
| 567 | |
---|
| 568 | %%%%%% SMROAddr %%%%% |
---|
| 569 | if ~strcmp(CompAddrName(1:9), 'SMROAddr_') |
---|
| 570 | display(['The Gateway In ' AddrName ' needs to have the prefix of SMROAddr_']); |
---|
| 571 | return; |
---|
| 572 | end |
---|
| 573 | |
---|
| 574 | % Delete the GatewayIn |
---|
| 575 | delete_block(SrcBlockHandleAddr); |
---|
| 576 | |
---|
| 577 | deleteSource(sys, cleanName(AddrName)); |
---|
| 578 | |
---|
| 579 | % Find the broken lines that starts from the output port of the |
---|
| 580 | % deleted GatewayIn |
---|
| 581 | brokenlines = find_system(sys,'LookUnderMasks', 'all', 'FollowLinks', 'on', 'FindAll', 'on', 'type', 'line', 'SrcBlockHandle', -1); |
---|
| 582 | |
---|
| 583 | % Find out the handle of the port and the block |
---|
| 584 | % These two handles will be used to extract more information |
---|
| 585 | DstPortHandle = get_param(brokenlines, 'DstPortHandle'); |
---|
| 586 | DstBlockHandle = get_param(brokenlines, 'DstBlockHandle'); |
---|
| 587 | |
---|
| 588 | % From DstPortHandle, we can find out what is |
---|
| 589 | % the destination port number |
---|
| 590 | if length(DstPortHandle) > 1 |
---|
| 591 | DstPortNumber = cell2mat(get_param(DstPortHandle{length(DstPortHandle)}, 'PortNumber')); |
---|
| 592 | else |
---|
| 593 | DstPortNumber = get_param(DstPortHandle, 'PortNumber'); |
---|
| 594 | end |
---|
| 595 | |
---|
| 596 | % From DstBlockHandle, we can find out what is the name of the |
---|
| 597 | % destination block |
---|
| 598 | if length(DstBlockHandle) > 1 |
---|
| 599 | DstName = get_param(DstBlockHandle{length(DstBlockHandle)}, 'Name'); |
---|
| 600 | try |
---|
| 601 | DstBlockType = get_param(DstBlockHandle{length(DstBlockHandle)}, 'block_type'); |
---|
| 602 | catch |
---|
| 603 | DstBlockType = get_param(DstBlockHandle{length(DstBlockHandle)}, 'BlockType'); |
---|
| 604 | end |
---|
| 605 | else |
---|
| 606 | DstName = get_param(DstBlockHandle, 'Name'); |
---|
| 607 | try |
---|
| 608 | DstBlockType = get_param(DstBlockHandle, 'block_type'); |
---|
| 609 | catch |
---|
| 610 | DstBlockType = get_param(DstBlockHandle, 'BlockType'); |
---|
| 611 | end |
---|
| 612 | end |
---|
| 613 | |
---|
| 614 | % Delete the borken lines |
---|
| 615 | delete_line(brokenlines); |
---|
| 616 | |
---|
| 617 | dpramROAddrIndex = dpramROAddrIndex + 1; |
---|
| 618 | dpramROAddr{dpramROAddrIndex} = fromAddr; |
---|
| 619 | %placeAddr(1,1) = placeAddr(1,1) - 60; |
---|
| 620 | placeAddr(1,3) = placeAddr(1,1) + 75; |
---|
| 621 | placeAddrSlice = placeAddr; |
---|
| 622 | placeAddrSlice(1,1) = placeAddrSlice(1,3) + 30; |
---|
| 623 | placeAddrSlice(1,3) = placeAddrSlice(1,1) + 50; |
---|
| 624 | add_block('built-in/From', fromAddr, 'GotoTag', ['SMROAddr_' int2str(dpramROAddrIndex - 1)], 'position', placeAddr); |
---|
| 625 | |
---|
[598] | 626 | if(( version == 8.1) | (version == 8.2) | (version == 9.1)) |
---|
[560] | 627 | add_block([spm '/Slice8'], fromAddrSlice, 'position', placeAddrSlice, 'nbits', fromAddrSliceBits); |
---|
| 628 | end |
---|
| 629 | |
---|
| 630 | FromName = get_param(fromAddr, 'Name'); |
---|
| 631 | FromSliceName = get_param(fromAddrSlice, 'Name'); |
---|
| 632 | set_param(fromAddr,'Orientation', orientationAddr); |
---|
| 633 | |
---|
| 634 | add_line(parentAddr, [FromName '/1' ], [FromSliceName '/1']); |
---|
| 635 | if size(DstName, 1) == 1 |
---|
| 636 | |
---|
| 637 | add_line(parentAddr, [FromSliceName '/1'], [DstName '/' int2str(DstPortNumber)]); |
---|
| 638 | %add_line(parentAddr, [FromName '/1' ], [DstName '/' int2str(DstPortNumber)]); |
---|
| 639 | else |
---|
| 640 | for i=1:size(DstName, 1) |
---|
| 641 | if ~strcmp(DstName{i}, get_param(dpramName, 'Name')) |
---|
| 642 | add_line(parentAddr, [FromName '/1'], [DstName{i} '/' mat2str(DstPortNumber(i))]); |
---|
| 643 | else |
---|
| 644 | add_line(parentAddr, [FromSliceName '/1'], [DstName{i} '/' mat2str(DstPortNumber(i))]); |
---|
| 645 | end |
---|
| 646 | end |
---|
| 647 | end |
---|
| 648 | |
---|
| 649 | if ~strcmp(get_param(SrcBlockHandleDataI, 'block_type'), 'constant') |
---|
| 650 | display(['A Xilinx constant is needed in order to connect to the dinb inport of the dpram ' dpramName '.']); |
---|
| 651 | return; |
---|
| 652 | end |
---|
| 653 | if ~strcmp(CompDataIName(1:10), 'SMRODataI_') |
---|
| 654 | display(['The Xilinx block ' DataIName ' needs to have a prefix of SMRODataI_']); |
---|
| 655 | return; |
---|
| 656 | end |
---|
| 657 | if (str2num(get_param(SrcBlockHandleDataI, 'const')) ~= 0) | ~strcmp(get_param(SrcBlockHandleDataI, 'n_bits'), '32') |
---|
| 658 | display(['The Xilinx constant ' DataIFullName ' needs to have a constant value of zero. Number of bits needs to be 32.']); |
---|
| 659 | return; |
---|
| 660 | end |
---|
| 661 | |
---|
| 662 | if ~strcmp(get_param(SrcBlockHandleWE, 'block_type'), 'constant') |
---|
| 663 | display(['A Xilinx constant is needed in order to connect to the web inport of the dpram ' dpramName '.']); |
---|
| 664 | return; |
---|
| 665 | end |
---|
| 666 | if ~strcmp(CompWEName(1:7), 'SMROWE_') |
---|
| 667 | display(['The Gateway In ', WEName ' needs to have the prefix SMROWE_']); |
---|
| 668 | return; |
---|
| 669 | end |
---|
| 670 | if (str2num(get_param(SrcBlockHandleWE, 'const')) ~=0) | (~strcmp(get_param(SrcBlockHandleWE, 'arith_type'), 'Boolean')) |
---|
| 671 | display(['The Xilinx constant ' WEFullName ' needs to be a Boolean constant with a value of zero.']); |
---|
| 672 | return; |
---|
| 673 | end |
---|
| 674 | |
---|
| 675 | %%%%% SMRODataO %%%%% |
---|
| 676 | DataOName = get_param(DstBlockHandleDataO, 'Name'); |
---|
| 677 | DataONameIdx = 1; |
---|
| 678 | if length(DstBlockHandleDataO) == 1 |
---|
| 679 | CompDataOName = [DataOName ' ']; |
---|
| 680 | DataOFullName = [get_param(DstBlockHandleDataO, 'Parent') '/' DataOName]; |
---|
| 681 | else |
---|
| 682 | for i=1:length(DstBlockHandleDataO) |
---|
| 683 | CompDataOName{i} = [DataOName{i} ' ']; |
---|
| 684 | DataOFullName{i} = [get_param(DstBlockHandleDataO(i), 'Parent') '/' DataOName{i}]; |
---|
| 685 | end |
---|
| 686 | end |
---|
| 687 | |
---|
| 688 | IsGatewayOut = false; |
---|
| 689 | |
---|
| 690 | for d=1:length(DstBlockHandleDataO) |
---|
| 691 | if strcmp(get_param(DstBlockHandleDataO(d), 'block_type'), 'gatewayout') |
---|
| 692 | IsGatewayOut = true; |
---|
| 693 | |
---|
| 694 | if length(DstBlockHandleDataO) == 1 |
---|
| 695 | currentCompDataOName = CompDataOName; |
---|
| 696 | else |
---|
| 697 | currentCompDataOName = CompDataOName{d}; |
---|
| 698 | end |
---|
| 699 | |
---|
| 700 | if ~strcmp(currentCompDataOName(1:10), 'SMRODataO_') |
---|
| 701 | display(['The Gateway Out ', DataOName ' needs to have a prefix of SMRODataO_']); |
---|
| 702 | return; |
---|
| 703 | end |
---|
| 704 | idxDataO = d; |
---|
| 705 | end |
---|
| 706 | end |
---|
| 707 | if IsGatewayOut == false |
---|
| 708 | display(['A GatewayOut is needed in order to connect to the B outport of the dpram ' dpramName '.']); |
---|
| 709 | return; |
---|
| 710 | end |
---|
| 711 | |
---|
| 712 | if length(DstBlockHandleDataO) > 1 |
---|
| 713 | DataOFullName = DataOFullName{idxDataO}; |
---|
| 714 | end |
---|
| 715 | |
---|
| 716 | DataOName = get_param(DataOFullName, 'Name'); |
---|
| 717 | orientationDataO = get_param(DataOFullName, 'Orientation'); |
---|
| 718 | placeDataO = get_param(DataOFullName, 'position'); |
---|
| 719 | parentDataO = get_param(DataOFullName, 'Parent'); |
---|
| 720 | gotoDataO = [parentDataO '/' cleanName(DataOName) '_sm' int2str(dpramWOROidx)]; |
---|
| 721 | |
---|
| 722 | % Delete the block |
---|
| 723 | delete_block(DataOFullName); |
---|
| 724 | |
---|
| 725 | deleteSink(sys, cleanName(DataOName)); |
---|
| 726 | |
---|
| 727 | brokenlines = find_system(sys,'LookUnderMasks', 'all', 'FollowLinks', 'on', 'FindAll', 'on', 'type', 'line', 'DstBlockHandle', -1); |
---|
| 728 | |
---|
| 729 | % Find out the handle of the port |
---|
| 730 | % This will be used to extract the port number |
---|
| 731 | SrcPortHandle = get_param(brokenlines, 'SrcPortHandle'); |
---|
| 732 | SrcPortNumber = get_param(SrcPortHandle, 'PortNumber'); |
---|
| 733 | |
---|
| 734 | % Find out the handle of the block |
---|
| 735 | % This will be used to extract the name of the block |
---|
| 736 | % This will also be used to extract the block type of the source |
---|
| 737 | SrcBlockHandle = get_param(brokenlines, 'SrcBlockHandle'); |
---|
| 738 | SrcName = get_param(SrcBlockHandle, 'Name'); |
---|
| 739 | try |
---|
| 740 | SrcBlockType = get_param(SrcBlockHandle, 'block_type'); |
---|
| 741 | catch |
---|
| 742 | SrcBlockType = get_param(SrcBlockHandle, 'BlockType'); |
---|
| 743 | end |
---|
| 744 | |
---|
| 745 | % Delete the broken line(s) |
---|
| 746 | delete_line(brokenlines); |
---|
| 747 | |
---|
| 748 | dpramRODataOIndex = dpramRODataOIndex + 1; |
---|
| 749 | dpramRODataO{dpramRODataOIndex} = gotoDataO; |
---|
| 750 | placeDataO(1,3) = placeDataO(1,3) + 60; |
---|
| 751 | add_block('built-in/Goto', gotoDataO, 'GotoTag', ['SMRODataO_' int2str(dpramRODataOIndex - 1)], 'TagVisibility', 'global', 'position', placeDataO); |
---|
| 752 | |
---|
| 753 | % Get the name of the Goto block |
---|
| 754 | GotoName = get_param(gotoDataO, 'Name'); |
---|
| 755 | |
---|
| 756 | % Set the orientation |
---|
| 757 | set_param(gotoDataO,'Orientation',orientationDataO); |
---|
| 758 | |
---|
| 759 | % Connect a line from the source to the Goto block |
---|
| 760 | add_line(parentDataO, [SrcName '/' int2str(SrcPortNumber)], [GotoName '/1']); |
---|
| 761 | |
---|
| 762 | end |
---|
| 763 | end |
---|
| 764 | end |
---|
| 765 | |
---|
| 766 | gatewaysIn = find_system(sys,'LookUnderMasks', 'all', 'FollowLinks', 'on', 'block_type','fromreg'); |
---|
| 767 | gatewaysOut = find_system(sys,'LookUnderMasks', 'all', 'FollowLinks', 'on', 'block_type','toreg'); |
---|
| 768 | |
---|
| 769 | % Delete all broken lines |
---|
| 770 | brokenlines = find_system(sys,'LookUnderMasks', 'all', 'FollowLinks', 'on', 'FindAll', 'on', 'type', 'line', 'SrcBlockHandle', -1); |
---|
| 771 | delete_line(brokenlines); |
---|
| 772 | brokenlines = find_system(sys,'LookUnderMasks', 'all', 'FollowLinks', 'on', 'FindAll', 'on', 'type', 'line', 'DstBlockHandle', -1); |
---|
| 773 | delete_line(brokenlines); |
---|
| 774 | |
---|
| 775 | % gatesIn will hold the final list of all GatewaysIn |
---|
| 776 | % that are converted to registers |
---|
| 777 | gatesIn={}; |
---|
| 778 | gatesIn_info = struct('arith_type',{},'nbits',{},'binpt',{},'initvalue',{}); |
---|
| 779 | validGates = 0; |
---|
| 780 | fReg={}; |
---|
| 781 | |
---|
| 782 | % Take every gateway (except the last one) and look at the |
---|
| 783 | % names after it to see if there is a repeat |
---|
| 784 | for c=1:length(gatewaysIn) |
---|
| 785 | % gateName will contain the full path of the gate |
---|
| 786 | gateName = gatewaysIn{c}; |
---|
| 787 | |
---|
| 788 | ftregsmName = get_param(gateName, 'shared_memory_name'); |
---|
| 789 | ftregsmName = ftregsmName(2:length(ftregsmName)-1); |
---|
| 790 | |
---|
| 791 | % shortName will contain only the name of the gate |
---|
| 792 | shortName = get_param(gateName,'Name'); |
---|
| 793 | |
---|
| 794 | %compName will be used to verify whether there is the prefix no_reg_ |
---|
| 795 | compName = [shortName ' ']; |
---|
| 796 | |
---|
| 797 | if ~strcmp(compName(1:7), 'no_reg_') %does this need to be a register? |
---|
| 798 | |
---|
| 799 | % Find the orientation, position, and parent of the GatewayIn |
---|
| 800 | orientation = get_param(gateName, 'Orientation'); |
---|
| 801 | place = get_param(gateName, 'position'); |
---|
| 802 | parent = get_param(gateName, 'Parent'); |
---|
| 803 | |
---|
| 804 | % Find the arith_type, number of bits, and bin_pt |
---|
| 805 | % This will be stored into a struct |
---|
| 806 | arithType = get_param(gateName, 'arith_type'); |
---|
| 807 | nBits = get_param(gateName, 'n_bits'); |
---|
| 808 | binPt = get_param(gateName, 'bin_pt'); |
---|
| 809 | initValue = '0'; |
---|
| 810 | |
---|
| 811 | initValue = num2str(get_param(gateName, 'init')); |
---|
| 812 | |
---|
| 813 | % from is the full path name of the From block |
---|
| 814 | % from = [get_param(gateName,'Parent') '/' cleanName(get_param(gateName,'Name'))]; |
---|
| 815 | from = [get_param(gateName,'Parent') '/' cleanName(get_param(gateName,'Name')) '_opb' int2str(validGates)]; |
---|
| 816 | |
---|
| 817 | |
---|
| 818 | % Delete the GatewayIn |
---|
| 819 | delete_block(gateName); |
---|
| 820 | |
---|
| 821 | % Find connected sources to the deleted GatewaysIn |
---|
| 822 | % If there are sources that are connected to the GatewayIn, append |
---|
| 823 | % the name of the gateway in to the source name |
---|
| 824 | % Also check if the source block type is a constant |
---|
| 825 | % If it is a constant, we will want to store the constant value |
---|
| 826 | % into the struct gatesIn_info. |
---|
| 827 | srcbrokenlines = find_system(sys, 'LookUnderMasks', 'all', 'FollowLinks', 'on', 'FindAll', 'on', 'type', 'line', 'DstBlockHandle', -1); |
---|
| 828 | if length(srcbrokenlines) > 0 |
---|
| 829 | % We have a source that was connected to the gateway in |
---|
| 830 | % Get the handle of the source block |
---|
| 831 | SrcBlockHandle = get_param(srcbrokenlines, 'SrcBlockHandle'); |
---|
| 832 | % Get the block type of the handle |
---|
| 833 | SrcBlockType = get_param(SrcBlockHandle, 'BlockType'); |
---|
| 834 | |
---|
| 835 | % If the block type is a constant, we will want to store the |
---|
| 836 | % constant value into initValue |
---|
| 837 | if strcmp(SrcBlockType, 'Constant') |
---|
| 838 | initValue = num2str(get_param(SrcBlockHandle, 'Value')); |
---|
| 839 | %gatesIn_info = setfield(gatesIn_info, {validGates}, 'initvalue', num2str(get_param(SrcBlockHandle, 'Value'))); |
---|
| 840 | end |
---|
| 841 | |
---|
| 842 | % Get the name of the source. The name of the GatewayIn will be |
---|
| 843 | % appended to the name of the source |
---|
| 844 | SrcName = get_param(SrcBlockHandle, 'name'); |
---|
| 845 | set_param(SrcBlockHandle, 'name', [SrcName '_' cleanName(shortName)]); |
---|
| 846 | delete_line(srcbrokenlines); |
---|
| 847 | end |
---|
| 848 | |
---|
| 849 | % Find the broken lines that starts from the output port of the |
---|
| 850 | % deleted GatewayIn |
---|
| 851 | brokenlines = find_system(sys,'LookUnderMasks', 'all', 'FollowLinks', 'on', 'FindAll', 'on', 'type', 'line', 'SrcBlockHandle', -1); |
---|
| 852 | |
---|
| 853 | % Find out the handle of the port and the block |
---|
| 854 | % These two handles will be used to extract more information |
---|
| 855 | DstPortHandle = get_param(brokenlines, 'DstPortHandle'); |
---|
| 856 | DstBlockHandle = get_param(brokenlines, 'DstBlockHandle'); |
---|
| 857 | |
---|
| 858 | % From DstPortHandle, we can find out what is |
---|
| 859 | % the destination port number |
---|
| 860 | if length(DstPortHandle) > 1 |
---|
| 861 | DstPortNumber = cell2mat(get_param(DstPortHandle{length(DstPortHandle)}, 'PortNumber')); |
---|
| 862 | else |
---|
| 863 | DstPortNumber = get_param(DstPortHandle, 'PortNumber'); |
---|
| 864 | end |
---|
| 865 | |
---|
| 866 | % From DstBlockHandle, we can find otu what is the name of the |
---|
| 867 | % destination block |
---|
| 868 | if length(DstBlockHandle) > 1 |
---|
| 869 | DstName = get_param(DstBlockHandle{length(DstBlockHandle)}, 'Name'); |
---|
| 870 | try |
---|
| 871 | DstBlockType = get_param(DstBlockHandle{length(DstBlockHandle)}, 'block_type'); |
---|
| 872 | catch |
---|
| 873 | DstBlockType = get_param(DstBlockHandle{length(DstBlockHandle)}, 'BlockType'); |
---|
| 874 | end |
---|
| 875 | else |
---|
| 876 | DstName = get_param(DstBlockHandle, 'Name'); |
---|
| 877 | try |
---|
| 878 | DstBlockType = get_param(DstBlockHandle, 'block_type'); |
---|
| 879 | catch |
---|
| 880 | DstBlockType = get_param(DstBlockHandle, 'BlockType'); |
---|
| 881 | end |
---|
| 882 | end |
---|
| 883 | |
---|
| 884 | % Delete the borken lines |
---|
| 885 | delete_line(brokenlines); |
---|
| 886 | |
---|
| 887 | validGates = validGates + 1; |
---|
| 888 | gatesIn_info = setfield(gatesIn_info, {validGates}, 'arith_type', arithType); |
---|
| 889 | gatesIn_info = setfield(gatesIn_info, {validGates}, 'nbits', nBits); |
---|
| 890 | gatesIn_info = setfield(gatesIn_info, {validGates}, 'binpt', binPt); |
---|
| 891 | gatesIn_info = setfield(gatesIn_info, {validGates}, 'initvalue', initValue); |
---|
| 892 | % gatesIn{validGates} = cleanName(gateName); |
---|
| 893 | gatesIn{validGates} = cleanName([gateName '_opb' int2str(validGates - 1)]); |
---|
| 894 | |
---|
| 895 | fReg{validGates} = cleanName([ftregsmName '_opb' int2str(validGates - 1)]); |
---|
| 896 | |
---|
| 897 | add_block('built-in/From', from,'GotoTag', ['in_' int2str(validGates-1)], 'position', place); |
---|
| 898 | |
---|
| 899 | |
---|
| 900 | FromName = get_param(from, 'Name'); |
---|
| 901 | set_param(from,'Orientation',orientation); |
---|
| 902 | |
---|
| 903 | if size(DstName, 1) == 1 |
---|
| 904 | add_line(parent, [FromName '/1' ], [DstName '/' int2str(DstPortNumber)]); |
---|
| 905 | else |
---|
| 906 | for i=1:size(DstName, 1) |
---|
| 907 | add_line(parent, [FromName '/1'], [DstName{i} '/' mat2str(DstPortNumber(i))]); |
---|
| 908 | end |
---|
| 909 | end |
---|
| 910 | |
---|
| 911 | idx=0; %appended to the end of a duplicate name |
---|
| 912 | for d=c+1:length(gatewaysIn) |
---|
| 913 | gateName2 = gatewaysIn{d}; |
---|
| 914 | shortName2 = get_param(gateName2,'Name'); |
---|
| 915 | if length(shortName2) < 7 |
---|
| 916 | compName2 = [shortName2 ' ']; |
---|
| 917 | else |
---|
| 918 | compName2 = shortName2; |
---|
| 919 | end |
---|
| 920 | |
---|
| 921 | if strcmp(cleanName(shortName),cleanName(shortName2)) | strcmp(cleanName(shortName), [appendString cleanName(compName2(8 : length(compName2)))]) |
---|
| 922 | set_param(gateName2,'Name', [shortName2 '_' int2str(idx)]); |
---|
| 923 | gatewaysIn{d} = [gatewaysIn{d} '_' int2str(idx)]; |
---|
| 924 | idx=idx+1; |
---|
| 925 | end |
---|
| 926 | end |
---|
| 927 | else |
---|
| 928 | newGateName = [appendString shortName(8 : length(shortName))]; |
---|
| 929 | |
---|
| 930 | idx=1; %appended to the end of a duplicate name |
---|
| 931 | for d=c+1:length(gatewaysIn) |
---|
| 932 | gateName2 = gatewaysIn{d}; |
---|
| 933 | shortName2 = get_param(gateName2,'Name'); |
---|
| 934 | if length(shortName2) < 7 |
---|
| 935 | compName2 = [shortName2 ' ']; |
---|
| 936 | else |
---|
| 937 | compName2 = shortName2; |
---|
| 938 | end |
---|
| 939 | |
---|
| 940 | if strcmp(cleanName(newGateName),cleanName(shortName2)) | strcmp(cleanName(newGateName), [appendString cleanName(compName2(8 : length(compName2)))]) |
---|
| 941 | if idx == 1 |
---|
| 942 | set_param(gateName, 'Name', [newGateName '_' int2str(0)]); |
---|
| 943 | end |
---|
| 944 | |
---|
| 945 | set_param(gateName2, 'Name', [shortName2 '_' int2str(idx)]); |
---|
| 946 | gatewaysIn{d} = [gatewaysIn{d} '_' int2str(idx)]; |
---|
| 947 | idx = idx+1; |
---|
| 948 | end |
---|
| 949 | end |
---|
| 950 | if idx == 1 |
---|
| 951 | set_param(gateName, 'Name', newGateName); |
---|
| 952 | end |
---|
| 953 | end |
---|
| 954 | end |
---|
| 955 | |
---|
| 956 | |
---|
| 957 | % Delete all broken lines |
---|
| 958 | brokenlines = find_system(sys,'LookUnderMasks', 'all', 'FollowLinks', 'on', 'FindAll', 'on', 'type', 'line', 'SrcBlockHandle', -1); |
---|
| 959 | delete_line(brokenlines); |
---|
| 960 | brokenlines = find_system(sys,'LookUnderMasks', 'all', 'FollowLinks', 'on', 'FindAll', 'on', 'type', 'line', 'DstBlockHandle', -1); |
---|
| 961 | delete_line(brokenlines); |
---|
| 962 | |
---|
| 963 | gatesOut={}; %will hold final list of all gateways intented to map into registers |
---|
| 964 | validGates = 0; |
---|
| 965 | tReg={}; |
---|
| 966 | |
---|
| 967 | for c=1:length(gatewaysOut) %take every gateway (except the last one) and look at the names after it to see if there is a repeat |
---|
| 968 | gateName = gatewaysOut{c}; |
---|
| 969 | shortName = get_param(gateName,'Name'); |
---|
| 970 | compName = [shortName ' ']; |
---|
| 971 | |
---|
| 972 | ftregsmName = get_param(gateName, 'shared_memory_name'); |
---|
| 973 | ftregsmName = ftregsmName(2:length(ftregsmName)-1); |
---|
| 974 | |
---|
| 975 | hdlPortStatus = 1; |
---|
| 976 | |
---|
| 977 | if hdlPortStatus && ~strcmp(compName(1:7), 'no_reg_') %does this need to be a register? |
---|
| 978 | |
---|
| 979 | % Get the orientation, position, and parent of the GatewayOut |
---|
| 980 | orientation = get_param(gateName, 'Orientation'); |
---|
| 981 | place = get_param(gateName,'position'); |
---|
| 982 | parent = get_param(gateName, 'Parent'); |
---|
| 983 | |
---|
| 984 | % goto is the full path name of the Goto block |
---|
| 985 | % goto = [get_param(gateName,'Parent') '/' cleanName(get_param(gateName,'Name'))]; |
---|
| 986 | goto = [get_param(gateName,'Parent') '/' cleanName(get_param(gateName,'Name')) '_opb' int2str(validGates)]; |
---|
| 987 | |
---|
| 988 | % Delete the block |
---|
| 989 | delete_block(gateName); |
---|
| 990 | |
---|
| 991 | % Find connected sinks to GatewayOut |
---|
| 992 | % If there are sinks that are connected to the GatewayOut, append |
---|
| 993 | % the name of the GatewayOut to the sink name |
---|
| 994 | dstbrokenlines = find_system(sys,'LookUnderMasks', 'all', 'FollowLinks', 'on', 'FindAll', 'on', 'type', 'line', 'SrcBlockHandle', -1); |
---|
| 995 | if length(dstbrokenlines) > 0 |
---|
| 996 | % We have a sink that was connected to the GatewayOut |
---|
| 997 | DstBlockHandle = get_param(dstbrokenlines, 'DstBlockHandle'); |
---|
| 998 | |
---|
| 999 | if length(DstBlockHandle) > 1 |
---|
| 1000 | for i=1:(length(DstBlockHandle) - 1) |
---|
| 1001 | DstName = get_param(DstBlockHandle{i}, 'Name'); |
---|
| 1002 | set_param(DstBlockHandle{i}, 'name', [DstName '_' cleanName(shortName)]); |
---|
| 1003 | end |
---|
| 1004 | delete_line(dstbrokenlines); |
---|
| 1005 | else |
---|
| 1006 | DstName = get_param(DstBlockHandle, 'name'); |
---|
| 1007 | set_param(DstBlockHandle, 'name', [DstName '_' cleanName(shortName)]); |
---|
| 1008 | delete_line(dstbrokenlines); |
---|
| 1009 | end |
---|
| 1010 | end |
---|
| 1011 | |
---|
| 1012 | brokenlines = find_system(sys,'LookUnderMasks', 'all', 'FollowLinks', 'on', 'FindAll', 'on', 'type', 'line', 'DstBlockHandle', -1); |
---|
| 1013 | |
---|
| 1014 | validGates=validGates+1; |
---|
| 1015 | % gatesOut{validGates} = cleanName(gateName); |
---|
| 1016 | % reggoto = [parent '/' cleanName(shortName)]; |
---|
| 1017 | % engoto = [parent '/enable_' cleanName(shortName)]; |
---|
| 1018 | |
---|
| 1019 | gatesOut{validGates} = cleanName([gateName '_opb' int2str(validGates-1)]); |
---|
| 1020 | |
---|
| 1021 | tReg{validGates} = cleanName([ftregsmName '_opb' int2str(validGates - 1)]); |
---|
| 1022 | |
---|
| 1023 | reggoto = [parent '/' cleanName([shortName '_opb' int2str(validGates-1)])]; |
---|
| 1024 | engoto = [parent '/enable_' cleanName([shortName '_opb' int2str(validGates-1)])]; |
---|
| 1025 | |
---|
| 1026 | if length(brokenlines) == 2 |
---|
| 1027 | pos1 = get_param(brokenlines(1), 'points'); |
---|
| 1028 | pos2 = get_param(brokenlines(2), 'points'); |
---|
| 1029 | |
---|
| 1030 | SrcPortHandle1 = get_param(brokenlines(1), 'SrcPortHandle'); |
---|
| 1031 | SrcPortHandle2 = get_param(brokenlines(2), 'SrcPortHandle'); |
---|
| 1032 | |
---|
| 1033 | SrcPortNumber1 = get_param(SrcPortHandle1, 'PortNumber'); |
---|
| 1034 | SrcPortNumber2 = get_param(SrcPortHandle2, 'PortNumber'); |
---|
| 1035 | |
---|
| 1036 | SrcBlockHandle1 = get_param(brokenlines(1), 'SrcBlockHandle'); |
---|
| 1037 | SrcBlockHandle2 = get_param(brokenlines(2), 'SrcBlockHandle'); |
---|
| 1038 | |
---|
| 1039 | SrcName1 = get_param(SrcBlockHandle1, 'Name'); |
---|
| 1040 | SrcName2 = get_param(SrcBlockHandle2, 'Name'); |
---|
| 1041 | |
---|
| 1042 | DstPortHandle1 = get_param(brokenlines(1), 'DstPortHandle'); |
---|
| 1043 | DstPortHandle2 = get_param(brokenlines(2), 'DstPortHandle'); |
---|
| 1044 | |
---|
| 1045 | add_block('built-in/Goto', reggoto,'GotoTag', ['out_' int2str(length(gatesIn)+validGates-1)], 'TagVisibility', 'global', 'position', place); |
---|
| 1046 | add_block('built-in/Goto', engoto,'GotoTag', ['en_out_' int2str(length(gatesIn)+validGates-1)], 'TagVisibility', 'global', 'position', place); |
---|
| 1047 | set_param(reggoto,'Orientation', orientation); |
---|
| 1048 | set_param(engoto, 'Orientation', orientation); |
---|
| 1049 | regname = get_param(reggoto, 'Name'); |
---|
| 1050 | enname = get_param(engoto, 'Name'); |
---|
| 1051 | |
---|
| 1052 | delete_line(brokenlines(1)); |
---|
| 1053 | delete_line(brokenlines(2)); |
---|
| 1054 | |
---|
| 1055 | if strcmp(orientation, 'right') | strcmp(orientation, 'left') |
---|
| 1056 | if pos1(length(pos1),2) < pos2(length(pos2),2) |
---|
| 1057 | add_line(parent, [SrcName1 '/' int2str(SrcPortNumber1)], [regname '/1']); |
---|
| 1058 | add_line(parent, [SrcName2 '/' int2str(SrcPortNumber2)], [enname '/1']); |
---|
| 1059 | else |
---|
| 1060 | add_line(parent, [SrcName2 '/' int2str(SrcPortNumber2)], [regname '/1']); |
---|
| 1061 | add_line(parent, [SrcName1 '/' int2str(SrcPortNumber1)], [enname '/1']); |
---|
| 1062 | end |
---|
| 1063 | else |
---|
| 1064 | if pos1(length(pos1),1) < pos2(length(pos2),1) |
---|
| 1065 | add_line(parent, [SrcName1 '/' int2str(SrcPortNumber1)], [regname '/1']); |
---|
| 1066 | add_line(parent, [SrcName2 '/' int2str(SrcPortNumber2)], [enname '/1']); |
---|
| 1067 | else |
---|
| 1068 | add_line(parent, [SrcName2 '/' int2str(SrcPortNumber2)], [regname '/1']); |
---|
| 1069 | add_line(parent, [SrcName1 '/' int2str(SrcPortNumber1)], [enname '/1']); |
---|
| 1070 | end |
---|
| 1071 | end |
---|
| 1072 | else |
---|
| 1073 | disp('Error: Too many broken lines'); |
---|
| 1074 | return; |
---|
| 1075 | end |
---|
| 1076 | |
---|
| 1077 | idx=0; %appended to the end of a duplicate name |
---|
| 1078 | for d=c+1:length(gatewaysOut) |
---|
| 1079 | gateName2 = gatewaysOut{d}; |
---|
| 1080 | shortName2 = get_param(gateName2,'Name'); |
---|
| 1081 | if length(shortName2) < 7 |
---|
| 1082 | compName2 = [shortName2 ' ']; |
---|
| 1083 | else |
---|
| 1084 | compName2 = shortName2; |
---|
| 1085 | end |
---|
| 1086 | |
---|
| 1087 | if strcmp(cleanName(shortName),cleanName(shortName2)) | strcmp(cleanName(shortName), [appendString cleanName(compName2(8 : length(compName2)))]) |
---|
| 1088 | set_param(gateName2,'Name', [shortName2 '_' int2str(idx)]); |
---|
| 1089 | gatewaysOut{d} = [gatewaysOut{d} '_' int2str(idx)]; |
---|
| 1090 | idx=idx+1; |
---|
| 1091 | end |
---|
| 1092 | end |
---|
| 1093 | elseif strcmp(compName(1:7), 'no_reg_') |
---|
| 1094 | newGateName = [appendString shortName(8 : length(shortName))]; |
---|
| 1095 | |
---|
| 1096 | idx=1; %appended to the end of a duplicate name |
---|
| 1097 | for d=c+1:length(gatewaysOut) |
---|
| 1098 | gateName2 = gatewaysOut{d}; |
---|
| 1099 | shortName2 = get_param(gateName2,'Name'); |
---|
| 1100 | if length(shortName2) < 7 |
---|
| 1101 | compName2 = [shortName2 ' ']; |
---|
| 1102 | else |
---|
| 1103 | compName2 = shortName2; |
---|
| 1104 | end |
---|
| 1105 | |
---|
| 1106 | if strcmp(cleanName(newGateName),cleanName(shortName2)) | strcmp(cleanName(newGateName), [appendString cleanName(compName2(8 : length(compName2)))]) |
---|
| 1107 | if idx == 1 |
---|
| 1108 | set_param(gateName, 'Name', [newGateName '_' int2str(0)]); |
---|
| 1109 | end |
---|
| 1110 | |
---|
| 1111 | set_param(gateName2, 'Name', [shortName2 '_' int2str(idx)]); |
---|
| 1112 | gatewaysIn{d} = [gatewaysIn{d} '_' int2str(idx)]; |
---|
| 1113 | idx = idx+1; |
---|
| 1114 | end |
---|
| 1115 | end |
---|
| 1116 | if idx == 1 |
---|
| 1117 | set_param(gateName, 'Name', newGateName); |
---|
| 1118 | end |
---|
| 1119 | end |
---|
| 1120 | end |
---|
| 1121 | |
---|
| 1122 | % Check to make sure that we have at least one GatewayIn and one GatewayOut |
---|
| 1123 | % that will convert to registers |
---|
| 1124 | if length(gatesIn)==0 | length(gatesOut)==0 |
---|
| 1125 | close_system(sys, 0); |
---|
| 1126 | display('Error: We need at least one From Register that will convert to register and one To Register that will convert to register'); |
---|
| 1127 | return; |
---|
| 1128 | end |
---|
| 1129 | |
---|
| 1130 | % Delete all broken lines |
---|
| 1131 | brokenlines = find_system(sys,'LookUnderMasks', 'all', 'FollowLinks', 'on', 'FindAll', 'on', 'type', 'line', 'SrcBlockHandle', -1); |
---|
| 1132 | delete_line(brokenlines); |
---|
| 1133 | brokenlines = find_system(sys,'LookUnderMasks', 'all', 'FollowLinks', 'on', 'FindAll', 'on', 'type', 'line', 'DstBlockHandle', -1); |
---|
| 1134 | delete_line(brokenlines); |
---|
| 1135 | |
---|
| 1136 | % now to make the new i/o subsystem |
---|
| 1137 | script1 = get_param(sys,'preloadfcn'); |
---|
| 1138 | script2 = get_param(sys,'initfcn'); |
---|
| 1139 | script3 = get_param(sys,'startfcn'); %first get all of the information needed from the init scripts for the model |
---|
| 1140 | try |
---|
| 1141 | run(script1); |
---|
| 1142 | run(script2); |
---|
| 1143 | run(script3); |
---|
| 1144 | catch |
---|
| 1145 | end |
---|
| 1146 | |
---|
| 1147 | % Add in the memory mapped IO from the skeleton model |
---|
| 1148 | try |
---|
| 1149 | add_block([spm '/main8'], [sys '/Memory Mapped I_O']); |
---|
| 1150 | catch |
---|
| 1151 | display('You already have converted this design to a peripheral.'); |
---|
| 1152 | display('Please get rid of the Memory Mapped I_O block and make sure') |
---|
| 1153 | display('your gateways are all still in place before trying again.'); |
---|
| 1154 | return; |
---|
| 1155 | end |
---|
| 1156 | add_block([spm '/addr_from'], [sys '/addr_from']); |
---|
| 1157 | add_block([spm '/a_valid_from'], [sys '/a_valid_from']); |
---|
| 1158 | add_block([spm '/p_select8'], [sys '/p_select'], 'Position', [100 236 160 274]); |
---|
| 1159 | |
---|
| 1160 | add_block([spm '/ps_goto'], [sys '/ps_goto']); |
---|
| 1161 | add_line(sys, 'addr_from/1', 'p_select/1'); |
---|
| 1162 | add_line(sys, 'a_valid_from/1', 'p_select/2'); |
---|
| 1163 | add_line(sys, 'p_select/1', 'ps_goto/1'); |
---|
| 1164 | ref = [sys '/Memory Mapped I_O']; |
---|
| 1165 | |
---|
| 1166 | set_param([sys '/p_select'], 'C_BASE', int2str(base)); %sets the base address according to the input parameter |
---|
| 1167 | %set_param([sys '/p_select'], 'C_HIGH', int2str(base+4*(length(gatesIn)+length(gatesOut)-1))); %sets the high address given number of inputs and outputs |
---|
| 1168 | try |
---|
| 1169 | HighAddress = base +(length(dpramWORO)+1)*hex2dec('10000') - 1; |
---|
| 1170 | catch |
---|
| 1171 | HighAddress = base + hex2dec('FFFF'); |
---|
| 1172 | end |
---|
| 1173 | set_param([sys '/p_select'], 'C_HIGH', int2str(HighAddress)); |
---|
| 1174 | |
---|
| 1175 | if strcmp(smChoice, 'smon') |
---|
| 1176 | for c=0:(length(dpramWODataI) - 1) |
---|
| 1177 | goto = [ref '/' 'SMWODataI_' int2str(c)]; |
---|
| 1178 | add_block('built-in/Goto', goto, 'GotoTag', ['SMWODataI_' int2str(c)], 'TagVisibility', 'global', 'position', place); |
---|
| 1179 | add_line(ref, 'OPB2IP_IF/4', ['SMWODataI_' int2str(c) '/1']); |
---|
| 1180 | end |
---|
| 1181 | end |
---|
| 1182 | |
---|
| 1183 | %takes care of OPB2IP_IF |
---|
| 1184 | subsys = [ref '/OPB2IP_IF']; |
---|
| 1185 | |
---|
| 1186 | if str2num(sysgenperiod) ~= 1 |
---|
| 1187 | set_param([subsys '/OPB_ABus'], 'period', sysgenperiod); |
---|
| 1188 | set_param([subsys '/OPB_BE'], 'period', sysgenperiod); |
---|
| 1189 | set_param([subsys '/OPB_DBus'], 'period', sysgenperiod); |
---|
| 1190 | set_param([subsys '/OPB_RNW'], 'period', sysgenperiod); |
---|
| 1191 | set_param([subsys '/OPB_Select'], 'period', sysgenperiod); |
---|
| 1192 | set_param([subsys '/OPB_seqAddr'], 'period', sysgenperiod); |
---|
| 1193 | set_param([subsys '/OPB_rst'], 'period', sysgenperiod); |
---|
| 1194 | end |
---|
| 1195 | |
---|
| 1196 | %takes care of the en_gen subsyst |
---|
| 1197 | %each subsequent address needs to be 4 bytes apart. |
---|
| 1198 | %After concatenating with the ack and rnw bits and slicing off the rest, we have a number that has |
---|
| 1199 | %2+log2(number of inputs and outputs) bits. |
---|
| 1200 | %the constant to compare with the address will need to be 2^(addr_width+1) |
---|
| 1201 | %+2^addr_width + addr for reads and 2^(addr_width+1)+addr for writes |
---|
| 1202 | |
---|
| 1203 | subsys = [ref '/en_gen']; |
---|
| 1204 | addr_width = ceil(log2(length(gatesIn)+length(gatesOut))); |
---|
| 1205 | set_param([subsys '/Slice'], 'nbits', int2str(addr_width)); |
---|
| 1206 | for c=0:length(gatesIn)-1 |
---|
| 1207 | writeRel = [subsys '/Write_rel_' int2str(c)]; |
---|
| 1208 | writeCon = [subsys '/Write_const_' int2str(c)]; |
---|
| 1209 | out = [subsys '/in_' int2str(c) '_we']; %write enable output |
---|
| 1210 | add_block([subsys '/given_relational'], writeRel); %write relational |
---|
| 1211 | add_block('built-in/Outport',out); |
---|
| 1212 | add_block([subsys '/given_constant'], writeCon, 'n_bits', int2str(2+addr_width), 'const', int2str(2^(addr_width+1)+c)); %write constant |
---|
| 1213 | add_line(subsys, 'Concat/1', [get_param(writeRel, 'Name') '/1']); |
---|
| 1214 | add_line(subsys, [get_param(writeCon,'Name') '/1'], [get_param(writeRel,'Name') '/2']); %attach second constant w/ second relational |
---|
| 1215 | add_line(subsys, [get_param(writeRel,'Name') '/1'], [get_param(out,'Name') '/1']); |
---|
| 1216 | end |
---|
| 1217 | |
---|
| 1218 | if strcmp(smChoice, 'smon') |
---|
| 1219 | if (length(dpramROAddr) + length(dpramWOAddr)) > 0 |
---|
| 1220 | add_block([subsys '/Slice'], [subsys '/AddrSlice' ], 'bit0', int2str(2), 'nbits', int2str(14)); |
---|
| 1221 | add_line(subsys, 'addr/1', ['AddrSlice/1']); |
---|
| 1222 | end |
---|
| 1223 | for c=0:(length(dpramROAddr) - 1) |
---|
| 1224 | goto = [subsys '/' cleanName(get_param(dpramROAddr{c+1}, 'Name'))]; |
---|
| 1225 | add_block('built-in/Goto', goto, 'GotoTag', ['SMROAddr_' int2str(c)], 'TagVisibility', 'global'); |
---|
| 1226 | add_line(subsys, ['AddrSlice/1'], [get_param(goto, 'Name'), '/1']); |
---|
| 1227 | end |
---|
| 1228 | for c=0:(length(dpramWOAddr) - 1) |
---|
| 1229 | goto = [subsys '/' cleanName(get_param(dpramWOAddr{c+1}, 'Name'))]; |
---|
| 1230 | add_block('built-in/Goto', goto, 'GotoTag', ['SMWOAddr_' int2str(c)], 'TagVisibility', 'global'); |
---|
| 1231 | add_line(subsys, ['AddrSlice/1'], [get_param(goto, 'Name'), '/1']); |
---|
| 1232 | end |
---|
| 1233 | if (length(dpramWOWE) > 0) |
---|
| 1234 | add_block([subsys '/Slice'], [subsys '/BankSelect_slice'], 'nbits', int2str(4), 'bit0', int2str(16)); |
---|
| 1235 | add_block([subsys '/given_constant'], [subsys '/BaseAddress_const'], 'n_bits', int2str(32), 'bin_pt', int2str(0), 'const', int2str(base)); |
---|
| 1236 | add_block([subsys '/Slice'], [subsys '/BaseAddress_slice'], 'nbits', int2str(4), 'bit0', int2str(16)); |
---|
| 1237 | add_block([subsys '/given_sub'], [subsys '/addr_sub']); |
---|
| 1238 | add_line(subsys, 'addr/1', 'BankSelect_slice/1'); |
---|
| 1239 | add_line(subsys, 'BaseAddress_const/1', 'BaseAddress_slice/1'); |
---|
| 1240 | add_line(subsys, 'BankSelect_slice/1', 'addr_sub/1'); |
---|
| 1241 | add_line(subsys, 'BaseAddress_slice/1', 'addr_sub/2'); |
---|
| 1242 | |
---|
| 1243 | add_block([subsys '/given_constant'], [subsys '/addr_const_' int2str(0)], 'n_bits', int2str(4), 'bin_pt', int2str(0), 'const', int2str(0)); |
---|
| 1244 | add_block([subsys '/given_relational'], [subsys '/addr_rel_' int2str(0)]); |
---|
| 1245 | add_line(subsys, 'addr_sub/1', ['addr_rel_' int2str(0) '/1']); |
---|
| 1246 | add_line(subsys, ['addr_const_' int2str(0) '/1'], ['addr_rel_' int2str(0) '/2']); |
---|
| 1247 | |
---|
| 1248 | add_block([subsys '/given_inverter'], [subsys '/not_reg']); |
---|
| 1249 | add_line(subsys, 'addr_rel_0/1', 'not_reg/1'); |
---|
| 1250 | delete_line(subsys, 'rnw/1', 'Concat/2'); |
---|
| 1251 | add_block([subsys, '/given_logical'], [subsys, '/or'], 'logical_function', 'OR', 'inputs', int2str(2)); |
---|
| 1252 | add_line(subsys, 'rnw/1', 'or/1'); |
---|
| 1253 | add_line(subsys, 'not_reg/1', 'or/2'); |
---|
| 1254 | add_line(subsys, 'or/1', 'Concat/2'); |
---|
| 1255 | end |
---|
| 1256 | |
---|
| 1257 | for c=1:length(dpramWOWE) |
---|
| 1258 | add_block([subsys '/given_constant'], [subsys '/addr_const_' int2str(c)], 'n_bits', int2str(4), 'bin_pt', int2str(0), 'const', int2str(length(dpramROAddr) + c)); |
---|
| 1259 | add_block([subsys '/given_relational'], [subsys '/addr_rel_' int2str(c)]); |
---|
| 1260 | add_line(subsys, 'addr_sub/1', ['addr_rel_' int2str(c) '/1']); |
---|
| 1261 | add_line(subsys, ['addr_const_' int2str(c) '/1'], ['addr_rel_' int2str(c) '/2']); |
---|
| 1262 | |
---|
| 1263 | goto = [subsys '/' cleanName(get_param(dpramWOWE{c}, 'Name'))]; |
---|
| 1264 | add_block([subsys '/given_inverter'], [subsys '/not_SM_' int2str(c)]); |
---|
| 1265 | add_block([subsys '/given_logical'], [subsys '/and_SM_' int2str(c)]); |
---|
| 1266 | add_block('built-in/Goto', goto, 'GotoTag', ['SMWOWE_' int2str(c-1)], 'TagVisibility', 'global'); |
---|
| 1267 | add_line(subsys, 'rnw/1', ['not_SM_' int2str(c) '/1']); |
---|
| 1268 | add_line(subsys, 'ack_in/1', ['and_SM_' int2str(c) '/1']); |
---|
| 1269 | add_line(subsys, ['not_SM_' int2str(c) '/1'], ['and_SM_' int2str(c) '/2']); |
---|
| 1270 | add_line(subsys, ['addr_rel_' int2str(c) '/1'], ['and_SM_' int2str(c) '/3']); |
---|
| 1271 | add_line(subsys, ['and_SM_' int2str(c) '/1'], [get_param(goto, 'Name'), '/1']); |
---|
| 1272 | end |
---|
| 1273 | end |
---|
| 1274 | |
---|
| 1275 | delete_block([subsys '/given_sub']); |
---|
| 1276 | delete_block([subsys '/given_logical']); |
---|
| 1277 | delete_block([subsys '/given_inverter']); |
---|
| 1278 | delete_block([subsys '/given_constant']); |
---|
| 1279 | delete_block([subsys '/given_relational']); |
---|
| 1280 | |
---|
| 1281 | |
---|
| 1282 | %takes care of the mem_if_in subsystem |
---|
| 1283 | subsys = [ref '/mem_if_in']; |
---|
| 1284 | for c=0:length(gatesIn)-1 |
---|
| 1285 | force = [subsys '/Reinterpret_' int2str(c)]; |
---|
| 1286 | cast = [subsys '/Convert_' int2str(c)]; |
---|
| 1287 | |
---|
| 1288 | reg = [subsys '/' get_param(gatesIn{c+1}, 'Name') '_' int2str(c)]; |
---|
| 1289 | in = [subsys '/in_' int2str(c) '_we']; |
---|
| 1290 | out = [subsys '/in_' int2str(c) '_data']; |
---|
| 1291 | goto = [subsys '/' cleanName(get_param(gatesIn{c+1},'Name'))]; |
---|
| 1292 | atype = getfield(gatesIn_info,{c+1}, 'arith_type'); |
---|
| 1293 | nbits = getfield(gatesIn_info,{c+1}, 'nbits'); |
---|
| 1294 | binpt = getfield(gatesIn_info,{c+1}, 'binpt'); |
---|
| 1295 | initvalue = getfield(gatesIn_info, {c+1}, 'initvalue'); |
---|
| 1296 | if ~strcmp(atype, 'Boolean') %gateway in not a boolean |
---|
| 1297 | add_block([subsys '/given_reinterpret'], force, 'arith_type', atype, 'bin_pt', binpt); |
---|
| 1298 | add_block([subsys '/given_convert'], cast, 'arith_type', atype, 'n_bits', nbits, 'bin_pt', binpt); |
---|
| 1299 | add_line(subsys, [get_param(force, 'Name') '/1'], [get_param(cast, 'Name') '/1']); |
---|
| 1300 | else |
---|
| 1301 | %gateway in is a boolean |
---|
| 1302 | add_block([subsys '/given_reinterpret'], force, 'bin_pt', '0'); |
---|
| 1303 | add_block([subsys '/given_convert'], [subsys '/Conv_' int2str(c)], 'arith_type', 'Unsigned', 'n_bits', '1', 'bin_pt', '0'); |
---|
| 1304 | add_block([subsys '/given_convert'], cast, 'arith_type', 'Boolean'); |
---|
| 1305 | add_line(subsys, [get_param(force, 'Name') '/1'], ['Conv_' int2str(c) '/1']); |
---|
| 1306 | add_line(subsys, ['Conv_' int2str(c) '/1'], [get_param(cast, 'Name') '/1']); |
---|
| 1307 | end |
---|
| 1308 | add_block([subsys '/given_register'], reg, 'init', initvalue); |
---|
| 1309 | add_block('built-in/Inport', in); |
---|
| 1310 | add_block('built-in/Outport', out); |
---|
| 1311 | add_block('built-in/Goto', goto, 'GotoTag', ['in_' int2str(c)], 'TagVisibility', 'global'); |
---|
| 1312 | add_line(subsys, [get_param(reg, 'Name') '/1'], [get_param(goto, 'Name') '/1']); |
---|
| 1313 | add_line(subsys, [get_param(cast,'Name') '/1'], [get_param(reg,'Name') '/1']); |
---|
| 1314 | add_line(subsys, [get_param(reg,'Name') '/1'], [get_param(out,'Name') '/1']); |
---|
| 1315 | add_line(subsys, [get_param(in,'Name') '/1'], [get_param(reg,'Name') '/2']); |
---|
| 1316 | add_line(subsys, 'opb_dbus/1', [get_param(force, 'Name') '/1']); |
---|
| 1317 | |
---|
| 1318 | end |
---|
| 1319 | delete_block([subsys '/given_convert']); |
---|
| 1320 | delete_block([subsys '/given_register']); |
---|
| 1321 | delete_block([subsys '/given_reinterpret']); |
---|
| 1322 | |
---|
| 1323 | |
---|
| 1324 | %takes care of the mem_if_out subsystem |
---|
| 1325 | subsys = [ref '/mem_if_out']; |
---|
| 1326 | |
---|
| 1327 | if strcmp(smChoice, 'smon') & dpramROIndex > 0 |
---|
| 1328 | set_param([subsys '/Delay'], 'latency', '1'); |
---|
| 1329 | end |
---|
| 1330 | |
---|
| 1331 | set_param([subsys '/Slice'], 'nbits', int2str(addr_width)); |
---|
| 1332 | gatesLeft = length(gatesIn)+length(gatesOut); |
---|
| 1333 | for c=0:length(gatesIn)-1 |
---|
| 1334 | dataIn = [subsys '/in_' int2str(c) '_data']; |
---|
| 1335 | cast = [subsys '/cast_' int2str(c)]; |
---|
| 1336 | force = [subsys '/force_' int2str(c)]; |
---|
| 1337 | add_block('built-in/Inport', dataIn); |
---|
| 1338 | add_block([subsys '/given_convert'], cast); |
---|
| 1339 | atype = getfield(gatesIn_info,{c+1}, 'arith_type'); |
---|
| 1340 | if strcmp(atype, 'Boolean') %gateway in is a boolean |
---|
| 1341 | add_line(subsys, [get_param(dataIn, 'Name') '/1'], [get_param(cast, 'Name') '/1']); |
---|
| 1342 | else |
---|
| 1343 | add_block([subsys '/given_reinterpret'], force); |
---|
| 1344 | add_line(subsys, [get_param(dataIn, 'Name') '/1'], [get_param(force, 'Name') '/1']); |
---|
| 1345 | add_line(subsys, [get_param(force, 'Name') '/1'], [get_param(cast, 'Name') '/1']); |
---|
| 1346 | end |
---|
| 1347 | end |
---|
| 1348 | for c = 0:length(gatesOut)-1 |
---|
| 1349 | from = [subsys '/' cleanName(get_param(gatesOut{c+1}, 'Name'))]; |
---|
| 1350 | register = [subsys '/' get_param(gatesOut{c+1}, 'Name') '_' int2str(length(gatesIn)+c)]; |
---|
| 1351 | cast = [subsys '/cast_' int2str(length(gatesIn)+c)]; |
---|
| 1352 | force = [subsys '/force_' int2str(length(gatesIn)+c)]; |
---|
| 1353 | enable = [subsys '/enable_' cleanName(get_param(gatesOut{c+1}, 'Name'))]; |
---|
| 1354 | |
---|
| 1355 | add_block('built-in/From', from, 'GotoTag', ['out_' int2str(length(gatesIn)+c)]); |
---|
| 1356 | add_block('built-in/From', enable, 'GotoTag', ['en_out_' int2str(length(gatesIn)+c)]); |
---|
| 1357 | add_block([subsys '/given_register'], register, 'en', 'on'); |
---|
| 1358 | |
---|
| 1359 | add_block([subsys '/given_convert'], cast); |
---|
| 1360 | add_block([subsys '/given_reinterpret'], force); |
---|
| 1361 | add_line(subsys, [get_param(from, 'Name') '/1'], [get_param(register, 'Name') '/1']); |
---|
| 1362 | add_line(subsys, [get_param(register, 'Name') '/1'], [get_param(force, 'Name') '/1']); |
---|
| 1363 | add_line(subsys, [get_param(force, 'Name') '/1'], [get_param(cast, 'Name') '/1']); |
---|
| 1364 | add_line(subsys, [get_param(enable, 'Name') '/1'], [get_param(register, 'Name') '/2']); |
---|
| 1365 | end |
---|
| 1366 | if strcmp(smChoice, 'smon') |
---|
| 1367 | for c = 0:length(dpramRODataO) - 1 |
---|
| 1368 | from = [subsys '/' cleanName(get_param(dpramRODataO{c+1}, 'Name'))]; |
---|
| 1369 | add_block('built-in/From', from, 'GotoTag', ['SMRODataO_' int2str(c)]); |
---|
| 1370 | if c==0 |
---|
| 1371 | mux = [subsys '/addrmux']; |
---|
| 1372 | add_block([subsys '/given_mux'], mux, 'inputs', int2str(length(dpramRODataO) + 1), 'position', [10, 10, 55, 85+30*length(dpramRODataO)]); |
---|
| 1373 | add_block([subsys '/Slice'], [subsys '/sel_slice'], 'bit0', int2str(16), 'nbits', int2str(length(dec2bin(length(dpramRODataO))))); |
---|
| 1374 | add_block([subsys '/given_constant'], [subsys '/base_address'], 'bin_pt', '0', 'n_bits', int2str(32), 'const', int2str(base)); |
---|
| 1375 | add_block([subsys '/given_addsub'], [subsys '/const_sub'], 'n_bits', int2str(length(dec2bin(length(dpramRODataO))))); |
---|
| 1376 | add_block([subsys '/Slice'], [subsys '/const_slice'], 'bit0', int2str(16), 'nbits', int2str(4)); |
---|
| 1377 | add_line(subsys, 'addr/1', 'sel_slice/1'); |
---|
| 1378 | add_line(subsys, 'base_address/1', 'const_slice/1'); |
---|
| 1379 | add_line(subsys, 'sel_slice/1', 'const_sub/1'); |
---|
| 1380 | add_line(subsys, 'const_slice/1', 'const_sub/2'); |
---|
| 1381 | add_line(subsys, 'const_sub/1', 'addrmux/1'); |
---|
| 1382 | add_line(subsys, 'Slice/1', 'addrmux/2'); |
---|
| 1383 | end |
---|
| 1384 | |
---|
| 1385 | constant = [subsys '/SMconstant_' int2str(c)]; |
---|
| 1386 | add_block([subsys '/given_constant'], constant, 'const', int2str(c + length(gatesIn) + length(gatesOut)), 'bin_pt', '0', 'n_bits', int2str(length(dec2bin(c+length(gatesIn)+length(gatesOut))))); |
---|
| 1387 | |
---|
| 1388 | add_line(subsys, [get_param(constant, 'Name') '/1'], [get_param(mux, 'Name') '/' int2str(c+3)]); |
---|
| 1389 | end |
---|
| 1390 | end |
---|
| 1391 | |
---|
| 1392 | %now we have all of the inputs and outputs going to a cast block, and we |
---|
| 1393 | %need to hook them up to the mux, sometimes requiring more than one layer |
---|
| 1394 | %of muxes |
---|
| 1395 | |
---|
| 1396 | if strcmp(smChoice, 'smon') |
---|
| 1397 | outsInCurrentLayer = length(gatesIn)+length(gatesOut) + length(dpramRODataO); |
---|
| 1398 | gwLeft = length(gatesIn) + length(gatesOut); |
---|
| 1399 | dpramIndex = 0; |
---|
| 1400 | else |
---|
| 1401 | outsInCurrentLayer = length(gatesIn)+length(gatesOut); |
---|
| 1402 | end |
---|
| 1403 | |
---|
| 1404 | numberMuxes = ceil(outsInCurrentLayer / 32); |
---|
| 1405 | if numberMuxes > 1 |
---|
| 1406 | delay = get_param([subsys '/Delay'], 'latency'); |
---|
| 1407 | delay = str2num(delay) + 1; |
---|
| 1408 | delay = set_param([subsys '/Delay'], 'latency', num2str(delay)); |
---|
| 1409 | end |
---|
| 1410 | |
---|
| 1411 | outsLeft = outsInCurrentLayer; |
---|
| 1412 | muxNames = []; |
---|
| 1413 | nextIdx = 1; %the index of the next cast block to be connected |
---|
| 1414 | begIdx = 0; %the index of the first cast block in the current mux |
---|
| 1415 | while(outsLeft>0 & outsLeft~=33) |
---|
| 1416 | mux = [subsys '/mux_' int2str(begIdx) '_' int2str(begIdx+min([outsLeft, 32])-1)]; |
---|
| 1417 | muxNames(nextIdx, 1:2) = [begIdx, begIdx+min([outsLeft, 32])-1]; |
---|
| 1418 | nextIdx = nextIdx+1; |
---|
| 1419 | add_block([subsys '/given_mux'], mux, 'inputs',int2str(min([outsLeft, 32])), 'position', [10, 10, 55, 85+30*min([outsLeft, 32])]); |
---|
| 1420 | for c=0:min([outsLeft, 32])-1 |
---|
| 1421 | if strcmp(smChoice, 'smon') |
---|
| 1422 | if gwLeft > 0 |
---|
| 1423 | add_line(subsys, ['cast_' int2str(begIdx+c) '/1'], [get_param(mux,'Name') '/' int2str(c+2)]); |
---|
| 1424 | gwLeft = gwLeft - 1; |
---|
| 1425 | else |
---|
| 1426 | dpramIndex = dpramIndex + 1; |
---|
| 1427 | add_line(subsys, [get_param(dpramRODataO{dpramIndex}, 'Name') '/1'], [get_param(mux,'Name') '/' int2str(c+2)]); |
---|
| 1428 | %add_line(subsys, ['SMconstant_' int2str(dpramIndex - 1) '/1'], ['addrmux/' int2str(dpramIndex+2)]); |
---|
| 1429 | end |
---|
| 1430 | else |
---|
| 1431 | add_line(subsys, ['cast_' int2str(begIdx+c) '/1'], [get_param(mux,'Name') '/' int2str(c+2)]); |
---|
| 1432 | end |
---|
| 1433 | end |
---|
| 1434 | addsub = [subsys '/a_correction_' int2str(muxNames(nextIdx-1,1))]; |
---|
| 1435 | const = [subsys '/const_' int2str(muxNames(nextIdx-1,1))]; |
---|
| 1436 | add_block([subsys '/given_constant'], const, 'const', int2str(muxNames(nextIdx-1,1)), 'n_bits', int2str(ceil(log2(2+muxNames(nextIdx-1,1))))); |
---|
| 1437 | add_block([subsys '/given_addsub'], addsub, 'n_bits', int2str(ceil(log2(min([outsLeft,32]))))); |
---|
| 1438 | if strcmp(smChoice, 'smon') |
---|
| 1439 | if (length(dpramRODataO) == 0) |
---|
| 1440 | add_line(subsys, 'Slice/1', [get_param(addsub,'Name') '/1']); |
---|
| 1441 | else |
---|
| 1442 | add_line(subsys, 'addrmux/1', [get_param(addsub,'Name') '/1']); |
---|
| 1443 | end |
---|
| 1444 | else |
---|
| 1445 | add_line(subsys, 'Slice/1', [get_param(addsub,'Name') '/1']); |
---|
| 1446 | end |
---|
| 1447 | add_line(subsys, [get_param(const,'Name') '/1'], [get_param(addsub,'Name') '/2']); |
---|
| 1448 | add_line(subsys, [get_param(addsub,'Name') '/1'], [get_param(mux, 'Name') '/1']); |
---|
| 1449 | begIdx = begIdx + min([outsLeft, 32]); |
---|
| 1450 | outsLeft = outsLeft - min([outsLeft, 32]); |
---|
| 1451 | end |
---|
| 1452 | if outsLeft==33 %break it up into two last muxes |
---|
| 1453 | mux1 = [subsys '/mux_' int2str(begIdx) '_' int2str(begIdx+15)]; %16 inputs |
---|
| 1454 | muxNames(nextIdx, 1:2) = [begIdx, begIdx+15]; |
---|
| 1455 | mux2 = [subsys '/mux_' int2str(begIdx+16) '_' int2str(begIdx+32)]; %17 inputs |
---|
| 1456 | muxNames(nextIdx+1, 1:2) = [begIdx+16, begIdx+32]; |
---|
| 1457 | nextIdx = nextIdx+2; |
---|
| 1458 | add_block([subsys '/given_mux'], mux1, 'inputs',int2str(16), 'position', [10, 10, 55, 565]); |
---|
| 1459 | add_block([subsys '/given_mux'], mux2, 'inputs',int2str(17), 'position', [10, 10, 55, 595]); |
---|
| 1460 | for c=0:15 |
---|
| 1461 | if strcmp(smChoice, 'smon') |
---|
| 1462 | if gwLeft > 0 |
---|
| 1463 | add_line(subsys, ['cast_' int2str(begIdx+c) '/1'], [get_param(mux1,'Name') '/' int2str(c+2)]); |
---|
| 1464 | try |
---|
| 1465 | add_line(subsys, ['cast_' int2str(begIdx+16+c) '/1'], [get_param(mux2,'Name') '/' int2str(c+2)]); |
---|
| 1466 | catch |
---|
| 1467 | dpramIndex = dpramIndex + 1; |
---|
| 1468 | add_line(subsys, [get_param(dpramRODataO{dpramIndex}, 'Name') '/1'], [get_param(mux2,'Name') '/' int2str(c+2)]); |
---|
| 1469 | end |
---|
| 1470 | else |
---|
| 1471 | dpramIndex = dpramIndex + 1; |
---|
| 1472 | add_line(subsys, [get_param(dpramRODataO{dpramIndex}, 'Name') '/1'], [get_param(mux2,'Name') '/' int2str(c+2)]); |
---|
| 1473 | end |
---|
| 1474 | else |
---|
| 1475 | add_line(subsys, ['cast_' int2str(begIdx+c) '/1'], [get_param(mux1,'Name') '/' int2str(c+2)]); |
---|
| 1476 | add_line(subsys, ['cast_' int2str(begIdx+16+c) '/1'], [get_param(mux2,'Name') '/' int2str(c+2)]); |
---|
| 1477 | end |
---|
| 1478 | end |
---|
| 1479 | |
---|
| 1480 | if strcmp(smChoice, 'smon') |
---|
| 1481 | if (gwLeft ==0) |
---|
| 1482 | add_line(subsys, ['cast_' int2str(begIdx+32) '/1'], [get_param(mux2,'Name') '/' int2str(18)]); |
---|
| 1483 | else |
---|
| 1484 | dpramIndex = dpramIndex + 1; |
---|
| 1485 | add_line(subsys, [get_param(dpramRODataO{dpramIndex}, 'Name') '/1'], [get_param(mux2,'Name') '/' int2str(18)]); |
---|
| 1486 | end |
---|
| 1487 | else |
---|
| 1488 | add_line(subsys, ['cast_' int2str(begIdx+32) '/1'], [get_param(mux2,'Name') '/' int2str(18)]); |
---|
| 1489 | end |
---|
| 1490 | |
---|
| 1491 | %connect first set of blocks to first mux |
---|
| 1492 | addsub1 = [subsys '/a_correction_' int2str(muxNames(nextIdx-2,1))]; |
---|
| 1493 | const1 = [subsys '/const_' int2str(muxNames(nextIdx-2,1))]; |
---|
| 1494 | add_block([subsys '/given_constant'], const1, 'const', int2str(muxNames(nextIdx-2,1)), 'n_bits', int2str(ceil(log2(2+muxNames(nextIdx-2,1))))); |
---|
| 1495 | add_block([subsys '/given_addsub'], addsub1, 'n_bits', '4'); |
---|
| 1496 | if strcmp(smChoice, 'smon') |
---|
| 1497 | if (length(dpramRODataO) == 0) |
---|
| 1498 | add_line(subsys, 'Slice/1', [get_param(addsub1,'Name') '/1']); |
---|
| 1499 | else |
---|
| 1500 | add_line(subsys, 'addrmux/1', [get_param(addsub1,'Name') '/1']); |
---|
| 1501 | end |
---|
| 1502 | else |
---|
| 1503 | add_line(subsys, 'Slice/1', [get_param(addsub1,'Name') '/1']); |
---|
| 1504 | end |
---|
| 1505 | add_line(subsys, [get_param(const1,'Name') '/1'], [get_param(addsub1,'Name') '/2']); |
---|
| 1506 | add_line(subsys, [get_param(addsub1,'Name') '/1'], [get_param(mux1, 'Name') '/1']); |
---|
| 1507 | %connect second set of blocks to second mux |
---|
| 1508 | addsub2 = [subsys '/a_correction_' int2str(muxNames(nextIdx-1,1))]; |
---|
| 1509 | const2 = [subsys '/const_' int2str(muxNames(nextIdx-1,1))]; |
---|
| 1510 | add_block([subsys '/given_constant'], const2, 'const', int2str(muxNames(nextIdx-1,1)), 'n_bits', int2str(ceil(log2(2+muxNames(nextIdx-1,1))))); |
---|
| 1511 | add_block([subsys '/given_addsub'], addsub2, 'n_bits', '5'); |
---|
| 1512 | if strcmp(smChoice, 'smon') |
---|
| 1513 | if (length(dpramRODataO) == 0) |
---|
| 1514 | add_line(subsys, 'Slice/1', [get_param(addsub2,'Name') '/1']); |
---|
| 1515 | else |
---|
| 1516 | add_line(subsys, 'addrmux/1', [get_param(addsub2,'Name') '/1']); |
---|
| 1517 | end |
---|
| 1518 | else |
---|
| 1519 | add_line(subsys, 'Slice/1', [get_param(addsub2,'Name') '/1']); |
---|
| 1520 | end |
---|
| 1521 | add_line(subsys, [get_param(const2,'Name') '/1'], [get_param(addsub2,'Name') '/2']); |
---|
| 1522 | add_line(subsys, [get_param(addsub2,'Name') '/1'], [get_param(mux2, 'Name') '/1']); |
---|
| 1523 | begIdx = begIdx + 33; |
---|
| 1524 | outsLeft = outsLeft - 33; |
---|
| 1525 | end |
---|
| 1526 | %first layer is done |
---|
| 1527 | begIdx = 0; |
---|
| 1528 | outsInCurrentLayer = ceil(outsInCurrentLayer/32); |
---|
| 1529 | if outsInCurrentLayer>1 %do second layer |
---|
| 1530 | set_param([subsys '/Delay'], 'latency', '1'); %delays the ack bit when there are two layers of muxes |
---|
| 1531 | rom = [subsys '/addr_conv']; %the rom converts the addr into proper select value for the new mux |
---|
| 1532 | initValues = []; |
---|
| 1533 | muxSelect = 0; |
---|
| 1534 | for block = 1:nextIdx-1 |
---|
| 1535 | initValues = [initValues; muxSelect*ones(muxNames(block,2)-muxNames(block,1)+1,1)]; %creates the initial values of the rom |
---|
| 1536 | muxSelect = muxSelect+1; |
---|
| 1537 | set_param([subsys '/mux_' int2str(muxNames(block,1)) '_' int2str(muxNames(block,2))], 'latency', '1'); %goes back and sets latency = 1 for all of the first layer muxes |
---|
| 1538 | end |
---|
| 1539 | |
---|
| 1540 | initValuesString = ['[']; |
---|
| 1541 | for c=1:length(initValues) |
---|
| 1542 | initValuesString = [initValuesString int2str(initValues(c)) ' ']; %converts initial values into a string representing the vector |
---|
| 1543 | end |
---|
| 1544 | initValuesString(length(initValuesString)) = ']'; |
---|
| 1545 | set_param(rom, 'depth', int2str(length(gatesIn)+length(gatesOut)), 'initVector', initValuesString, 'n_bits', int2str(ceil(log2(initValues(length(initValues))+1)))); |
---|
| 1546 | if strcmp(smChoice, 'smon') |
---|
| 1547 | if (length(dpramRODataO) == 0) |
---|
| 1548 | add_line(subsys, 'Slice/1', 'addr_conv/1'); |
---|
| 1549 | else |
---|
| 1550 | add_line(subsys, 'addrmux/1', 'addr_conv/1'); |
---|
| 1551 | end |
---|
| 1552 | else |
---|
| 1553 | add_line(subsys, 'Slice/1', 'addr_conv/1'); |
---|
| 1554 | end |
---|
| 1555 | outsLeft = outsInCurrentLayer; |
---|
| 1556 | mux = [subsys '/mux_' int2str(muxNames(begIdx+1,1)) '_' int2str(muxNames(begIdx+outsLeft,2))]; |
---|
| 1557 | add_block([subsys '/given_mux'], mux, 'inputs',int2str(outsLeft), 'position', [10, 10, 55, 85+30*outsLeft]); |
---|
| 1558 | muxNames(nextIdx, 1:2) = [muxNames(begIdx+1,1), muxNames(begIdx+outsLeft,2)]; |
---|
| 1559 | nextIdx = nextIdx+1; |
---|
| 1560 | for c=0:outsLeft-1 |
---|
| 1561 | add_line(subsys, ['mux_' int2str(muxNames(begIdx+1+c,1)) '_' int2str(muxNames(begIdx+1+c,2)) '/1'], [get_param(mux,'Name') '/' int2str(2+c)]); |
---|
| 1562 | end |
---|
| 1563 | add_line(subsys, 'addr_conv/1', [get_param(mux,'Name') '/1']); |
---|
| 1564 | else |
---|
| 1565 | delete_block([subsys '/addr_conv']); |
---|
| 1566 | end |
---|
| 1567 | add_line(subsys, ['mux_' int2str(muxNames(nextIdx-1,1)) '_' int2str(muxNames(nextIdx-1,2)) '/1'], 'valid_data/1'); |
---|
| 1568 | |
---|
| 1569 | |
---|
| 1570 | delete_block([subsys '/given_register']); |
---|
| 1571 | delete_block([subsys '/given_convert']); |
---|
| 1572 | delete_block([subsys '/given_addsub']); |
---|
| 1573 | delete_block([subsys '/given_constant']); |
---|
| 1574 | delete_block([subsys '/given_mux']); |
---|
| 1575 | delete_block([subsys '/given_reinterpret']); |
---|
| 1576 | |
---|
| 1577 | |
---|
| 1578 | %now attach all of the subsystems appropriately |
---|
| 1579 | for c=1:length(gatesIn) |
---|
| 1580 | add_line(ref, ['en_gen/' int2str(c+2)], ['mem_if_in/' int2str(c+1)]); |
---|
| 1581 | add_line(ref, ['mem_if_in/' int2str(c)], ['mem_if_out/' int2str(2+c)]); |
---|
| 1582 | end |
---|
| 1583 | |
---|
| 1584 | %makes text log of gateways that were removed |
---|
[754] | 1585 | fid = fopen([sys '.h'],'w'); |
---|
[560] | 1586 | |
---|
| 1587 | fprintf(fid, '%s\n', ['#include "xbasic_types.h"']); |
---|
| 1588 | fprintf(fid, '%s\n', ['#include "xstatus.h"']); |
---|
| 1589 | fprintf(fid, '%s\n\n\n', ['#include "xio.h"']); |
---|
| 1590 | |
---|
| 1591 | fprintf(fid, '%s\n', ['#define ' upper(sys) '_OFFSET (0x00000000)']); |
---|
| 1592 | |
---|
| 1593 | fprintf(fid, '%s\n\n', '//Gateways In'); |
---|
| 1594 | for c = 0:length(gatesIn)-1 |
---|
| 1595 | varName = cleanName(fReg{c+1}); |
---|
| 1596 | |
---|
| 1597 | opbLocation = findstr(varName, '_opb'); |
---|
| 1598 | if length(opbLocation) == 1 |
---|
| 1599 | varName = varName(1:opbLocation-1); |
---|
| 1600 | else |
---|
| 1601 | varName = varName(1:opbLocation(length(opbLocation))-1); |
---|
| 1602 | end |
---|
| 1603 | |
---|
| 1604 | fprintf(fid, '%s\n', ['#define ' sys '_' varName '_OFFSET (' upper(sys) '_OFFSET+0x' dec2hex(4*c) ')']); |
---|
| 1605 | %fprintf(fid, '%s\n', ['#define ' sys '_' varName ' (' upper(sys) '_BASEADDR+0x' dec2hex(4*c) ')']); |
---|
| 1606 | fprintf(fid, '%s\n', ['//tag name: in_' int2str(c)]); |
---|
| 1607 | fprintf(fid, '%s\n', ['//arith_type = ' getfield(gatesIn_info, {c+1}, 'arith_type')]); |
---|
| 1608 | fprintf(fid, '%s\n', ['//num_bits = ' getfield(gatesIn_info, {c+1}, 'nbits')]); |
---|
| 1609 | fprintf(fid, '%s\n', ['//bin_pt = ' getfield(gatesIn_info, {c+1}, 'binpt')]); |
---|
| 1610 | end |
---|
| 1611 | fprintf(fid, '\n%s\n\n', '//Gateways Out'); |
---|
| 1612 | for c = 0:length(gatesOut)-1 |
---|
| 1613 | varName = cleanName(tReg{c+1}); |
---|
| 1614 | |
---|
| 1615 | opbLocation = findstr(varName, '_opb'); |
---|
| 1616 | if length(opbLocation) == 1 |
---|
| 1617 | varName = varName(1:opbLocation-1); |
---|
| 1618 | elseif length(opbLocation) > 1 |
---|
| 1619 | varName = varName(1:opbLocation(length(opbLocation))-1); |
---|
| 1620 | end |
---|
| 1621 | |
---|
| 1622 | fprintf(fid, '%s\n', ['#define ' sys '_' varName '_OFFSET (' upper(sys) '_OFFSET+0x' dec2hex(4*(length(gatesIn) + c)) ')']); |
---|
| 1623 | %fprintf(fid, '%s\n', ['#define ' sys '_' varName ' (' upper(sys) '_BASEADDR+0x' dec2hex(4*(length(gatesIn) + c)) ')']); |
---|
| 1624 | fprintf(fid, '%s\n', ['//tag name: out_' int2str(length(gatesIn)+c)]); |
---|
| 1625 | %fprintf(fid, '%s\n', ['//arith_type = ' arith_type{1}]); |
---|
| 1626 | %fprintf(fid, '%s\n', ['//num_bits = ' n_bits{1}]); |
---|
| 1627 | %fprintf(fid, '%s\n', ['//bin_pt = ' bin_pt{1}]); |
---|
| 1628 | end |
---|
| 1629 | |
---|
| 1630 | if strcmp(smChoice, 'smon') |
---|
| 1631 | fprintf(fid, '\n%s\n\n', '//Shared Memory Address'); |
---|
| 1632 | for c=0:length(dpramWORO) - 1 |
---|
| 1633 | |
---|
| 1634 | varName = cleanName(dpramWORO{c+1}); |
---|
| 1635 | smLocation = findstr(varName, '_sm'); |
---|
| 1636 | if length(smLocation) == 1 |
---|
| 1637 | varName = varName(1:smLocation-1); |
---|
| 1638 | elseif length(smLocation) > 1 |
---|
| 1639 | varName = varName(1:smLocation(length(smLocation))-1); |
---|
| 1640 | end |
---|
| 1641 | |
---|
| 1642 | fprintf(fid, '%s\n', ['#define ' sys '_' varName '_OFFSET (' upper(sys) '_OFFSET+0x' dec2hex(c+1) '0000)']); |
---|
| 1643 | %fprintf(fid, '%s\n\n', ['#define ' sys '_' varName ' (' upper(sys) '_BASEADDR+0x' dec2hex(c+1) '0000)']); |
---|
| 1644 | end |
---|
| 1645 | end |
---|
| 1646 | |
---|
| 1647 | |
---|
| 1648 | |
---|
| 1649 | fprintf(fid, '\n\n%s', ['#define ' sys '_WriteReg(BaseAddress, RegOffset, Data) \']); |
---|
| 1650 | fprintf(fid, '\n\tXIo_Out32((BaseAddress) + (RegOffset), (Xuint32)(Data))'); |
---|
| 1651 | |
---|
| 1652 | |
---|
| 1653 | fprintf(fid, '\n\n%s', ['#define ' sys '_ReadReg(BaseAddress, RegOffset) \']); |
---|
| 1654 | fprintf(fid, '\n\tXIo_In32((BaseAddress) + (RegOffset))'); |
---|
| 1655 | |
---|
| 1656 | fprintf(fid, '\n\n%s\n\n', '//Write Reg Macro'); |
---|
| 1657 | for c = 0:length(gatesIn)-1 |
---|
| 1658 | varName = cleanName(fReg{c+1}); |
---|
| 1659 | |
---|
| 1660 | opbLocation = findstr(varName, '_opb'); |
---|
| 1661 | if length(opbLocation) == 1 |
---|
| 1662 | varName = varName(1:opbLocation-1); |
---|
| 1663 | else |
---|
| 1664 | varName = varName(1:opbLocation(length(opbLocation))-1); |
---|
| 1665 | end |
---|
| 1666 | |
---|
| 1667 | fprintf(fid, '%s\n', ['#define ' sys '_WriteReg_' varName '(BaseAddress, Value) \']); |
---|
| 1668 | fprintf(fid, '\t%s\n', ['XIo_Out32((BaseAddress) + (' sys '_' varName '_OFFSET), (Xuint32)(Value))']); |
---|
| 1669 | end |
---|
| 1670 | for c = 0:length(gatesOut)-1 |
---|
| 1671 | varName = cleanName(tReg{c+1}); |
---|
| 1672 | |
---|
| 1673 | opbLocation = findstr(varName, '_opb'); |
---|
| 1674 | if length(opbLocation) == 1 |
---|
| 1675 | varName = varName(1:opbLocation-1); |
---|
| 1676 | elseif length(opbLocation) > 1 |
---|
| 1677 | varName = varName(1:opbLocation(length(opbLocation))-1); |
---|
| 1678 | end |
---|
| 1679 | |
---|
| 1680 | |
---|
| 1681 | fprintf(fid, '%s\n', ['#define ' sys '_WriteReg_' varName '(BaseAddress, Value) \']); |
---|
| 1682 | fprintf(fid, '\t%s\n', ['XIo_Out32((BaseAddress) + (' sys '_' varName '_OFFSET), (Xuint32)(Value))']); |
---|
| 1683 | end |
---|
| 1684 | if strcmp(smChoice, 'smon') |
---|
| 1685 | for c=0:length(dpramWORO) - 1 |
---|
| 1686 | |
---|
| 1687 | varName = cleanName(dpramWORO{c+1}); |
---|
| 1688 | smLocation = findstr(varName, '_sm'); |
---|
| 1689 | if length(smLocation) == 1 |
---|
| 1690 | varName = varName(1:smLocation-1); |
---|
| 1691 | elseif length(smLocation) > 1 |
---|
| 1692 | varName = varName(1:smLocation(length(smLocation))-1); |
---|
| 1693 | end |
---|
| 1694 | |
---|
| 1695 | fprintf(fid, '%s\n', ['#define ' sys '_WriteReg_' varName '(BaseAddress, Value) \']); |
---|
| 1696 | fprintf(fid, '\t%s\n', ['XIo_Out32((BaseAddress) + (' sys '_' varName '_OFFSET), (Xuint32)(Value))']); |
---|
| 1697 | end |
---|
| 1698 | end |
---|
| 1699 | |
---|
| 1700 | fprintf(fid, '\n\n%s\n\n', '//Read Reg Macro'); |
---|
| 1701 | for c = 0:length(gatesIn)-1 |
---|
| 1702 | varName = cleanName(fReg{c+1}); |
---|
| 1703 | |
---|
| 1704 | opbLocation = findstr(varName, '_opb'); |
---|
| 1705 | if length(opbLocation) == 1 |
---|
| 1706 | varName = varName(1:opbLocation-1); |
---|
| 1707 | else |
---|
| 1708 | varName = varName(1:opbLocation(length(opbLocation))-1); |
---|
| 1709 | end |
---|
| 1710 | |
---|
| 1711 | fprintf(fid, '%s\n', ['#define ' sys '_ReadReg_' varName '(BaseAddress) \']); |
---|
| 1712 | fprintf(fid, '\t%s\n', ['XIo_In32((BaseAddress) + (' sys '_' varName '_OFFSET))']); |
---|
| 1713 | end |
---|
| 1714 | for c = 0:length(gatesOut)-1 |
---|
| 1715 | varName = cleanName(tReg{c+1}); |
---|
| 1716 | |
---|
| 1717 | opbLocation = findstr(varName, '_opb'); |
---|
| 1718 | if length(opbLocation) == 1 |
---|
| 1719 | varName = varName(1:opbLocation-1); |
---|
| 1720 | elseif length(opbLocation) > 1 |
---|
| 1721 | varName = varName(1:opbLocation(length(opbLocation))-1); |
---|
| 1722 | end |
---|
| 1723 | |
---|
| 1724 | fprintf(fid, '%s\n', ['#define ' sys '_ReadReg_' varName '(BaseAddress) \']); |
---|
| 1725 | fprintf(fid, '\t%s\n', ['XIo_In32((BaseAddress) + (' sys '_' varName '_OFFSET))']); |
---|
| 1726 | end |
---|
| 1727 | if strcmp(smChoice, 'smon') |
---|
| 1728 | for c=0:length(dpramWORO) - 1 |
---|
| 1729 | |
---|
| 1730 | varName = cleanName(dpramWORO{c+1}); |
---|
| 1731 | smLocation = findstr(varName, '_sm'); |
---|
| 1732 | if length(smLocation) == 1 |
---|
| 1733 | varName = varName(1:smLocation-1); |
---|
| 1734 | elseif length(smLocation) > 1 |
---|
| 1735 | varName = varName(1:smLocation(length(smLocation))-1); |
---|
| 1736 | end |
---|
| 1737 | |
---|
| 1738 | fprintf(fid, '%s\n', ['#define ' sys '_ReadReg_' varName '(BaseAddress) \']); |
---|
| 1739 | fprintf(fid, '\t%s\n', ['XIo_In32((BaseAddress) + (' sys '_' varName '_OFFSET))']); |
---|
| 1740 | end |
---|
| 1741 | end |
---|
| 1742 | |
---|
| 1743 | fclose(fid); |
---|
| 1744 | |
---|
| 1745 | |
---|
| 1746 | %clean up models |
---|
| 1747 | set_param([ref '/en_gen'], 'position', [10, 10, 100, 70+40*length(gatesIn)]); |
---|
| 1748 | set_param([ref '/mem_if_out'], 'position', [10, 10, 120, 70+40*length(gatesIn)]); |
---|
| 1749 | set_param([ref '/mem_if_in'], 'position', [10, 10, 120, 70+40*length(gatesIn)]); |
---|
| 1750 | xlTBUtils('Layout', struct('x_pitch',150,'sys',ref)); |
---|
| 1751 | xlTBUtils('Layout',struct('sys',[ref '/en_gen'])); |
---|
| 1752 | xlTBUtils('Layout', struct('sys', [ref '/mem_if_in'])); |
---|
| 1753 | xlTBUtils('Layout', struct('x_pitch', 150, 'sys', [ref '/mem_if_out'])); |
---|
| 1754 | |
---|
| 1755 | save_system(sys); |
---|
| 1756 | close_system(sys); |
---|
| 1757 | |
---|
| 1758 | function name = cleanName(name) |
---|
| 1759 | for c = 1:length(name) |
---|
| 1760 | if name(c)==' ' |
---|
| 1761 | name(c)='_'; |
---|
| 1762 | end |
---|
| 1763 | end |
---|
| 1764 | |
---|
| 1765 | function deleteSink(sys, shortName) |
---|
| 1766 | % Find connected sinks to GatewayOut |
---|
| 1767 | % If there are sinks that are connected to the GatewayOut, append |
---|
| 1768 | % the name of the GatewayOut to the sink name |
---|
| 1769 | dstbrokenlines = find_system(sys,'LookUnderMasks', 'all', 'FollowLinks', 'on', 'FindAll', 'on', 'type', 'line', 'SrcBlockHandle', -1); |
---|
| 1770 | if length(dstbrokenlines) > 0 |
---|
| 1771 | % We have a sink that was connected to the GatewayOut |
---|
| 1772 | DstBlockHandle = get_param(dstbrokenlines, 'DstBlockHandle'); |
---|
| 1773 | |
---|
| 1774 | if length(DstBlockHandle) > 1 |
---|
| 1775 | for i=1:(length(DstBlockHandle) - 1) |
---|
| 1776 | DstName = get_param(DstBlockHandle{i}, 'Name'); |
---|
| 1777 | set_param(DstBlockHandle{i}, 'name', [DstName '_' cleanName(shortName)]); |
---|
| 1778 | end |
---|
| 1779 | delete_line(dstbrokenlines); |
---|
| 1780 | else |
---|
| 1781 | DstName = get_param(DstBlockHandle, 'name'); |
---|
| 1782 | set_param(DstBlockHandle, 'name', [DstName '_' cleanName(shortName)]); |
---|
| 1783 | delete_line(dstbrokenlines); |
---|
| 1784 | end |
---|
| 1785 | |
---|
| 1786 | end |
---|
| 1787 | |
---|
| 1788 | |
---|
| 1789 | function deleteSource(sys, shortName) |
---|
| 1790 | % Find connected sources to the deleted GatewaysIn |
---|
| 1791 | % If there are sources that are connected to the GatewayIn, append |
---|
| 1792 | % the name of the gateway in to the source name |
---|
| 1793 | % Also check if the source block type is a constant |
---|
| 1794 | % If it is a constant, we will want to store the constant value |
---|
| 1795 | % into the struct gatesIn_info. |
---|
| 1796 | srcbrokenlines = find_system(sys, 'LookUnderMasks', 'all', 'FollowLinks', 'on', 'FindAll', 'on', 'type', 'line', 'DstBlockHandle', -1); |
---|
| 1797 | if length(srcbrokenlines) > 0 |
---|
| 1798 | % We have a source that was connected to the gateway in |
---|
| 1799 | % Get the handle of the source block |
---|
| 1800 | SrcBlockHandle = get_param(srcbrokenlines, 'SrcBlockHandle'); |
---|
| 1801 | % Get the block type of the handle |
---|
| 1802 | SrcBlockType = get_param(SrcBlockHandle, 'BlockType'); |
---|
| 1803 | |
---|
| 1804 | % If the block type is a constant, we will want to store the |
---|
| 1805 | % constant value into initValue |
---|
| 1806 | if strcmp(SrcBlockType, 'Constant') |
---|
| 1807 | initValue = num2str(get_param(SrcBlockHandle, 'Value')); |
---|
| 1808 | %gatesIn_info = setfield(gatesIn_info, {validGates}, 'initvalue', num2str(get_param(SrcBlockHandle, 'Value'))); |
---|
| 1809 | end |
---|
| 1810 | |
---|
| 1811 | % Get the name of the source. The name of the GatewayIn will be |
---|
| 1812 | % appended to the name of the source |
---|
| 1813 | SrcName = get_param(SrcBlockHandle, 'name'); |
---|
| 1814 | set_param(SrcBlockHandle, 'name', [SrcName '_' cleanName(shortName)]); |
---|
| 1815 | delete_line(srcbrokenlines); |
---|
| 1816 | end |
---|