Changes between Version 8 and Version 9 of 802.11/wlan_exp/app_notes/dcf_with_multiple_flows

Timestamp:

Apr 16, 2014, 4:29:02 PM (10 years ago)

Author:

chunter

Comment:

--

802.11/wlan_exp/app_notes/dcf_with_multiple_flows

@@ -19 +19 @@
 === Experimental Setup ===
 
-While all of the example code provided by this application note will operate over-the-air with antennas, we chose to use RF cabling with attenuators to make the results repeatable and easier to discuss.
+While all of the example code provided by this application note will operate over-the-air (OTA) with antennas, we chose to use RF cabling with attenuators to make the results repeatable and easier to discuss.
 
 ||  [[Image(wiki:802.11/wlan_exp/app_notes/dcf_with_multiple_flows/figs:experimental_setup.png, width=400)]]  ||  [[Image(wiki:802.11/wlan_exp/app_notes/dcf_with_multiple_flows/figs:experimental_setup_photo.jpg, width=400)]]  ||
@@ -35 +35 @@
 == Experiment 1: Symmetric and Fully Connected ==
 
+In this first experiment, we aim to see how the 802.11 Reference Design behaves when all nodes are "fully connected" with nearly-matched path losses between every combination of nodes. Topologically, this mimics the scenario where each of the three nodes sit on the vertex of an equilateral triangle.
+
+==== Experiment Details ====
+ * Attenuation 1: 45dB
+ * Attenuation 2: 15dB
+ * Attenuation 3: 15dB
+ * Packet Length: 1400 byte payloads (1428 bytes OTA with MAC header and FCS)
+
+=== Baseline: Performance of Each Flow in Isolation ===
+
+As a first cut,
+
+
 == Experiment 2: Symmetric with Hidden Stations ==
+
+==== Experiment Details ====
+ * Attenuation 1: 0dB
+ * Attenuation 2: 60dB
+ * Attenuation 3: 60dB
+ * Packet Length: 1400 byte payloads (1428 bytes OTA with MAC header and FCS)
 
 == Resources ==