35 | | RESULS GO HERE |
| 36 | Initializing experiment |
| 37 | |
| 38 | Reseting the network config for all nodes on subnet 10.0.0. |
| 39 | Initializing W3-a-00006 as Node 0 |
| 40 | Initializing W3-a-00183 as Node 1 |
| 41 | Initializing the time of all nodes on 10.0.0 to: 0.0 |
| 42 | |
| 43 | Experimental Setup: |
| 44 | |
| 45 | Node 0: |
| 46 | Channel = 4 |
| 47 | Tx Power = 10 dBm |
| 48 | |
| 49 | Node 1: |
| 50 | Channel = 4 |
| 51 | Tx Power = 10 dBm |
| 52 | |
| 53 | Adding current time to log for nodes on 10.0.0 |
| 54 | |
| 55 | Start LTG - AP -> STA: |
| 56 | |
| 57 | Run Experiment: |
| 58 | |
| 59 | Starting 10 sec trial for rate 6.0 Mbps (BPSK 1/2) ... |
| 60 | Done. |
| 61 | |
| 62 | Starting 10 sec trial for rate 9.0 Mbps (BPSK 3/4) ... |
| 63 | Done. |
| 64 | |
| 65 | Starting 10 sec trial for rate 12.0 Mbps (QPSK 1/2) ... |
| 66 | Done. |
| 67 | |
| 68 | Starting 10 sec trial for rate 18.0 Mbps (QPSK 3/4) ... |
| 69 | Done. |
| 70 | |
| 71 | Starting 10 sec trial for rate 24.0 Mbps (16-QAM 1/2) ... |
| 72 | Done. |
| 73 | |
| 74 | Starting 10 sec trial for rate 36.0 Mbps (16-QAM 3/4) ... |
| 75 | Done. |
| 76 | |
| 77 | Starting 10 sec trial for rate 48.0 Mbps (64-QAM 2/3) ... |
| 78 | Done. |
| 79 | |
| 80 | Starting 10 sec trial for rate 54.0 Mbps (64-QAM 3/4) ... |
| 81 | Done. |
| 82 | |
| 83 | |
| 84 | Results: |
| 85 | Rate = 6.0 Mbps Throughput = 5.44 Mbps |
| 86 | Rate = 9.0 Mbps Throughput = 7.84 Mbps |
| 87 | Rate = 12.0 Mbps Throughput = 10.13 Mbps |
| 88 | Rate = 18.0 Mbps Throughput = 14.16 Mbps |
| 89 | Rate = 24.0 Mbps Throughput = 17.69 Mbps |
| 90 | Rate = 36.0 Mbps Throughput = 23.61 Mbps |
| 91 | Rate = 48.0 Mbps Throughput = 28.27 Mbps |
| 92 | Rate = 54.0 Mbps Throughput = 30.38 Mbps |