Changes between Version 7 and Version 8 of FAQ/Hardware


Ignore:
Timestamp:
Jan 27, 2007, 8:46:46 PM (17 years ago)
Author:
murphpo
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • FAQ/Hardware

    v7 v8  
    2828The alternate method is to use a Xilinx programming cable like the [http://www.xilinx.com/onlinestore/program_solutions.htm Parallel IV or Platform USB] cables. These cables connect to the standard 14-pin programming header on the FPGA board. The header is labeled 'SysACE' and is component J49. If your FPGA board has previously been configured via the USB port, this connector will *not* work until you disable the USB port. Follow the directions below to accomplish this.
    2929
    30 == How do I bypass the USB configuration interface? ==
     30----
     31
     32== How do I bypass the FPGA board's USB configuration interface? ==
    3133In some cases, it is necessary to bypass the WARP FPGA board's built-in USB configuration circuit. You will need an external Xilinx programming cable to do this.
    3234