Changes between Version 4 and Version 5 of GettingStarted/WARPv3/Hardware

Timestamp:

Aug 1, 2012, 10:41:21 AM (12 years ago)

Author:

chunter

Comment:

--

GettingStarted/WARPv3/Hardware

@@ -55 +55 @@
 These terminators should be removed when an antenna or RF cable are connected.
 
-=== Inserting an FMC Module ===
+=== Installing an FMC Module ===
 
 WARP v3 includes a FMC HPC slot for connectivity to other hardware. This connector is mechanically very solid, and care must be taken to brace the WARP board when connecting an FMC module.
@@ -63 +63 @@
 }}}
 The above video shows the proper technique for connecting an FMC module. '''Do not''' simply press the FMC module down. Keep the WARP board from bending by pinching the FMC module and the WARP board together.
+
+=== Removing an FMC Module ===
+
+Similarly, removing an FMC module requires bracing the WARP board from any flexing.
+
+{{{
+#!html
+<iframe width="1024" height="576" src="http://www.youtube.com/embed/kLR0ckut2wM?rel=0" frameborder="0" allowfullscreen></iframe>
+}}}
+
+The above video shows the proper technique for removing FMC modules.