Changes between Version 6 and Version 7 of GettingStarted/WARPv3/Hardware
- Timestamp:
- Sep 13, 2012, 4:29:20 AM (12 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
GettingStarted/WARPv3/Hardware
v6 v7 57 57 === Installing an FMC Module === 58 58 59 WARP v3 includes a FMC HPC slot for connectivity to other hardware. This connector is mechanically very solid, and care must be taken to brace the WARP board when connecting an FMC module.59 WARP v3 includes a FMC HPC slot which can host an FMC module (a.k.a. FMC daughtercard). The FMC connector requires considerable force to mate and separate boards. It is essential you brace the WARP v3 board when mounting/removing FMC modules, to avoid flexing the PCB and breaking solder joints under the FMC connector and FPGA. 60 60 61 61 The video below shows the proper technique for connecting an FMC module. '''Do not''' simply press the FMC module down. Always prevent flexing the WARP board by pinching the FMC module and the WARP board together.