| | 1 | [[TracNav(HardwareUsersGuides/AnalogBoard_v1.1/TOC)]] |
| | 2 | |
| | 3 | == WARP Analog Board A/D Converters == |
| | 4 | |
| | 5 | [[Image(HardwareUsersGuides/AnalogBoard_v1.1/Images:WARP_Analog_Board_adc.jpg)]] |
| | 6 | |
| | 7 | There are 2 channels of Analog-to-Digital conversion on the board. These are provided by a dual channel, 14-bit, 65MSPS ADC chip from Analog Devices ([http://www.analog.com/en/prod/0%2C2877%2CAD9248%2C00.html AD9248]). The two channels run independently and have a separate parallel interface to the FPGA via the daughtercard headers. |
| | 8 | |
| | 9 | The input to the board must be restricted to 2V p-p (±1V). This input must be provided on the two MCX jacks on the south side of the board with the upper one ADC Channel A and the lower one ADC Channel B. |
