30 | | The DIP switch settings should only be changed when the module is unpowered. Some combinations of switch states are invalid- always ensure switch settings using the tables below. |
31 | | |
32 | | '''The default setting is switches 3 and 5 ON, switches 1, 2, 5, 6 OFF.''' These settings enable both clock buffers and set all dividers to 1. |
33 | | |
34 | | '''The tables below list all valid switch settings. Any other switch setting is invalid and will result in unpredictable clock behavior.''' |
| 30 | '''Important Notes:''' |
| 31 | * The default setting is switches 3 and 5 ON, switches 1, 2, 4, 6 OFF. This setting enables both clock buffers and sets all dividers to 1. |
| 32 | * The FMC-RF-2X245 board must be unpowered before changing switch settings. |
| 33 | * The tables below list all valid switch settings. Any other setting is invalid and will result in unpredictable clock behavior. |