Changes between Version 1 and Version 2 of HardwareUsersGuides/WARPv3/Mechanical


Ignore:
Timestamp:
Mar 4, 2013, 9:39:34 PM (11 years ago)
Author:
murphpo
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • HardwareUsersGuides/WARPv3/Mechanical

    v1 v2  
    22= WARP v3 User Guide: Mechanical =
    33
     4A mechanical drawing of the WARP v3 rev1.1 PCB is available here:
     5[attachment:wiki:HardwareUsersGuides/WARPv3/files:Mango_WARPv3_rev1p1_Mech.pdf?format=raw Mango_WARPv3_rev1p1_Mech.pdf].
    46
    5 [attachment:wiki:HardwareUsersGuides/WARPv3/files:Mango_WARPv3_rev1p1_Mech.pdf?format=raw Mango_WARPv3_rev1p1_Mech.pdf]
     7== Mounting Holes ==
     8The WARP v3 PCB has many mounting holes. See the figure below for the hole labels. Refer to the PDF drawing above for hole dimensions and locations.
     9
     10[[Image(wiki:HardwareUsersGuides/WARPv3/files:Mango_WARPv3_rev1p1_Mech_holes.png,nolink)]]
     11
     12On standard WARP v3 kits:
     13 * MH1, MH2, MH5, MH7 and MH8 are used for board standoffs (0.75" aluminium posts with rubber feet)
     14 * MH3 is reserved for securing Clock Modules
     15 * MH9 is covered by the SO-DIMM
     16
     17The MHx holes accomodate standard 4-40 machine screws.
     18
     19The holes labeled FMC1 and FMC2 are specified in the FMC standard. Compliant FMC modules (including Mango's [wiki:HardwareUsersGuides/FMC-RF-2X245 FMC-RF-2X245] and [wiki:HardwareUsersGuides/FMC-BB-4DA FMC-BB-4DA]) have matching holes. When an FMC module is mounted these holes are used to secure the module to the WARP v3 PCB. The nearby mounting holes (MH4, MH6) can be fitted with additional standoffs by the end user to provide additional support for FMC modules. The FMCx holes accomodate standard M2.5 machine screws.
    620
    721