Changes between Version 10 and Version 11 of HardwareUsersGuides/WARPv3/RF


Ignore:
Timestamp:
Sep 23, 2015, 12:05:27 PM (9 years ago)
Author:
murphpo
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • HardwareUsersGuides/WARPv3/RF

    v10 v11  
    145145Every node is calibrated during manufacturing, with the calibration values stored in the board's EEPROM. You should read and apply these calibration values in every custom design which uses the RF interfaces.
    146146
    147 The Tx DCO calibration values are stored at dedicated bytes in the EEPROM. See the [wiki:../../EEPROM EEPROM page] for details.
     147The Tx DCO calibration values are stored at dedicated bytes in the EEPROM. See the [wiki:../EEPROM EEPROM page] for details.
    148148
    149149The WARP v3 design uses auxiliary DACs in the AD9963 to apply small DC offsets to the differential I/Q DAC outputs. The auxiliary DACs are configured via SPI. The [wiki:/cores/w3_ad_controller w3_ad_controller] driver provides functions for writing the DAC values from user code.