Changes between Version 1 and Version 2 of OFDM/MIMO/Docs/PHYDetails/FrameFormat


Ignore:
Timestamp:
Dec 29, 2006, 8:25:37 PM (17 years ago)
Author:
murphpo
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • OFDM/MIMO/Docs/PHYDetails/FrameFormat

    v1 v2  
    11== [wiki:OFDM/MIMO MIMO OFDM] | [wiki:OFDM/MIMO#Documentation Documentation] | OFDM Frame Format ==
    22
    3 The frame format for the WARP MIMO OFDM core is based loosly on the frame format specified in the [http://ieeexplore.ieee.org/xpl/standardstoc.jsp?isnumber=17645&isYear=1999 IEEE 802.11a] wireless networking standard.
     3The frame format for the WARP MIMO OFDM core is based loosely on the frame format specified in the [http://ieeexplore.ieee.org/xpl/standardstoc.jsp?isnumber=17645&isYear=1999 IEEE 802.11a] wireless networking standard.
    44
    55Each frame is divided into four sections, illustrated below:
    … …  
    77[[Image(OFDM/MIMO/Docs/Images:FrameFormatOverview.png)]]
    88
    9  *Preamble: a hard-coded 320-sample sequence used by the receiver for AGC, carrier frequency offset estimation and symbol timing estimation
    10  *Training: hard-coded OFDM symbols used for channel estimation. The number of training symbol periods is programmable per-packet.
    11  *Base Rate: a programmable number of OFDM symbols containing a packet's header, modulated using the user-specified base-rate modulation scheme.
    12  *Full Rate: a programmable number of OFDM symbols containing a packet's payload, modulated using the user-specified full-rate modulation scheme.
     9 * Preamble: a hard-coded 320-sample sequence used by the receiver for AGC, carrier frequency offset estimation and symbol timing estimation
     10 * Training: hard-coded OFDM symbols used for channel estimation. The number of training symbol periods is programmable per-packet.
     11 * Base Rate: a programmable number of OFDM symbols containing a packet's header, modulated using the user-specified base-rate modulation scheme.
     12 * Full Rate: a programmable number of OFDM symbols containing a packet's payload, modulated using the user-specified full-rate modulation scheme.
    1313
    1414The WARP MIMO OFDM core supports both single (SISO) and two antenna (MIMO) modes. The frame formats for these two modes are detailed below.