Changes between Version 16 and Version 17 of WARPLab/Examples/8x2Array
- Timestamp:
- May 14, 2013, 2:48:08 PM (11 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
WARPLab/Examples/8x2Array
v16 v17 19 19 20 20 == Setup == 21 [[Image(8x2_ overview.jpg,width=650)]]21 [[Image(8x2_diagram.png,width=800)]] 22 22 23 23 To run this example, you must set up your experiment as follows: … … 35 35 Please refer to the [wiki:../../HardwareConfiguration WARPLab Hardware Configuration] user guide for more details on each of these steps. 36 36 37 [[Image(8x2_cable_micro.jpg,width=650)]] 38 39 === Photos of Setup === 40 41 [[Image(8x2_overview.jpg,width=650)]] 37 42 [[Image(8x2_cable_macro.jpg,width=800)]] 38 [[Image(8x2_cable_micro.jpg,width=650)]] 43 39 44 40 45 Once the hardware is connected and programmed you can run the example m code: [source:/ResearchApps/PHY/WARPLAB/WARPLab7/M_Code_Examples/wl_example_8x2_array.m wl_example_8x2_array.m].