Changes between Version 1 and Version 2 of WARPLab/HardwareConfiguration/WARPv2
- Timestamp:
- May 14, 2013, 2:43:14 PM (11 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
WARPLab/HardwareConfiguration/WARPv2
v1 v2 11 11 * In the 4 RF Node configuration (ie all RF interfaces are populated), you should only use the '''4RF bitstream''' in the [wiki:WARPLab/Downloads download]. 12 12 13 13 14 === Debug Header === 14 15 … … 19 20 20 21 === Clock Configuration === 22 The WARPLab reference design does not require any external clock connections. By default the reference design will use the oscillators on the WARP v2 board for all system and RF clocking. 23 24 The reference design does support both sourcing and sinking external clocks for synchronization of multiple nodes. The WARP v2 kit must be equipped with a [wiki:HardwareUsersGuides/ClockBoard_v1.1 clock board] to source/sink clocks. 21 25 22 26 * Detailed information on the WARP v2 Clocking configuration can be found [wiki:HardwareUsersGuides/FPGABoard_v2.2/Clocking here]. 23 * To adjust the [wiki:HardwareUsersGuides/ClockBoard_v1.1]27 * Detailed information on the WARP v2 Clock Board can be found [wiki:HardwareUsersGuides/ClockBoard_v1.1 here]. 24 28 25 29