[[TracNav(WARPLab/TOC)]]

= WARPLab Reference Design Hardware Config: WARP v2 =

[[Image(WARP_v2_labelled.png)]]


=== Radio Interface ===

  * In the 2 RF Node configuration (ie only RF A and RF B are populated), you should only use the '''2RF bitstream''' in the [wiki:WARPLab/Downloads download].
  * In the 4 RF Node configuration (ie all RF interfaces are populated), you should only use the '''4RF bitstream''' in the [wiki:WARPLab/Downloads download]. 

=== Debug Header ===

The [wiki:HardwareUsersGuides/FPGABoard_v2.2/OtherIO#DigitalIO debug header] is configured by default to map to the following pins:

[[Image(Debug_Header_Diagram_BnW.png)]]


=== Clock Configuration ===

  * Detailed information on the WARP v2 Clocking configuration can be found [wiki:HardwareUsersGuides/FPGABoard_v2.2/Clocking here].
  * To adjust the [wiki:HardwareUsersGuides/ClockBoard_v1.1] 


=== Ethernet ===

  * Only one Ethernet connection (Eth A) on the board