[[TracNav(WARPLab/TOC)]]

= System Requirements =

== Hardware Requirements ==
WARPLab 7 supports WARP v3 and WARP v2 hardware.

For the 2-radio WARPLab reference design:
 * WARP v3 nodes use the integrated RF interfaces
 * WARP v2 nodes must have Radio Boards in daughtercard slots 2 and 3

For the 4-radio WARPLab reference design:
 * WARP v3 nodes must be equipped with the [wiki:HardwareUsersGuides/FMC-RF-2X245 FMC-RF-2X245] radio FMC module
 * WARP v2 nodes must have Radio Boards in all four daughtercard slots

WARP v1 users should use the [wiki:WARPLab6 WARPLab 6] reference design.

== Software Requirements ==
 * MATLAB 2009b or later

== PC requirements ==
 * Dedicated NIC for WARPLab network I/O
  * Static IP address in the 10.0.0.X subnet
  * Open firewall for UDP ports (10000 and [9000:9000+numNodes-1])