Changes between Version 10 and Version 11 of WARPLab6


Ignore:
Timestamp:
Jul 11, 2008, 1:41:29 PM (16 years ago)
Author:
mduarte
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • WARPLab6

    v10 v11  
    1717 * Version 2: Posted on April 2008. Supports SISO and MIMO (2x2) communication and allows continuous transmission mode. This was the version used at the Sixth WARP Workshop (held at Nile University on April 16-17 2008). Two bitstreams are provided, one bitstream to program the boards in the SISO configuration and another bitstream to program the boards in the 2x2 MIMO configuration. The MATLAB functions support both SISO and 2x2 MIMO.
    1818
    19  * Version 3: Posted on July 2008. Supports MIMO 4x4 communication and allows continuous transmission mode for 2x2 MIMO. This was the version used at the Seventh WARP Workshop (held at Rice University on July 14-15 2008). Two bitstreams are provided, one bitstream to program the boards in the 2x2 MIMO configuration and another bitstream to program the boards in the 4x4 MIMO configuration. Continuous transmission mode and reading of RSSI values is supported by the 2x2 MIMO bitstream but not by the 4x4 MIMO bitstream. When the boards are programmed with the 4x4 MIMO bitstream 2x2 MIMO communication is possible but continuous transmission and reading of RSSI values is not possible. The MATLAB functions support both 2x2 and 4x4 MIMO bitstreams.
     19 * Version 3: Posted on July 2008. Supports MIMO 4x4 communication and allows continuous transmission mode for 2x2 MIMO. This was the version used at the Seventh WARP Workshop (held at Rice University on July 14-15 2008). Two bitstreams are provided, one bitstream to program the boards in the 2x2 MIMO configuration and another bitstream to program the boards in the 4x4 MIMO configuration. Continuous transmission mode and reading of RSSI values is supported by the 2x2 MIMO bitstream but not by the 4x4 MIMO bitstream. When the boards are programmed with the 4x4 MIMO bitstream 2x2 MIMO communication is possible but continuous transmission mode and reading of RSSI values is not possible. The MATLAB functions support both 2x2 and 4x4 MIMO bitstreams.
    2020
    2121