Changes between Version 7 and Version 8 of WARPLab6

Timestamp:

Apr 14, 2008, 5:42:08 AM (16 years ago)

Author:

MelissaDuarte

Comment:

--

WARPLab6

@@ -25 +25 @@
 clear all functions
 }}}
- * [source:/ResearchApps/PHY/WARPLAB/WARPLAB_SISO/M_code Link to version 1 of the source code].
- * [source:/ResearchApps/PHY/WARPLAB/WARPLab_SISO_MIMO2x2/M_Code Link to version 2 of the source code].
+ * [source:/ResearchApps/PHY/WARPLAB/WARPLAB_SISO/M_code Version 1 of the source code].
+ * [source:/ResearchApps/PHY/WARPLAB/WARPLab_SISO_MIMO2x2/M_Code Version 2 of the source code].
  3. Connect your PC and two WARP boards to a common Ethernet switch. Ideally, nothing else should be connected to the same switch.
  4. Set your PC's IP address to 10.0.0.200
  5. Set the DIP switches on two boards to 0 and 1
  6. Download the WARPLab bitstream to both boards.
- * [source:/ResearchApps/PHY/WARPLAB/WARPLAB_SISO/warplab_siso.bit Link to the SISO bitstream] that works with version 1 of the source code
- * [source:ResearchApps/PHY/WARPLAB/WARPLab_SISO_MIMO2x2/warplab_siso_v02.bit Link to the SISO bitstream] that works with version 2 of the source code.
- * [source:ResearchApps/PHY/WARPLAB/WARPLab_SISO_MIMO2x2/warplab_mimo_2x2_v02.bit Link to the 2x2 MIMO bitstream] that works with version 2 of the source code.
+ * [source:/ResearchApps/PHY/WARPLAB/WARPLAB_SISO/warplab_siso.bit SISO bitstream] that works with version 1 of the source code
+ * [source:ResearchApps/PHY/WARPLAB/WARPLab_SISO_MIMO2x2/warplab_siso_v02.bit SISO bitstream] that works with version 2 of the source code.
+ * [source:ResearchApps/PHY/WARPLAB/WARPLab_SISO_MIMO2x2/warplab_mimo_2x2_v02.bit 2x2 MIMO bitstream] that works with version 2 of the source code.
  7. Try one of the examples. The GUI (warplab_siso_Gui) is the best one to start with.