wiki:WARPLab6

Version 3 (modified by murphpo, 16 years ago) (diff)

--

WARPLab

WARPLab is a framework which brings together WARP and MATLAB. With WARPLab, you can interact with WARP nodes directly from the MATLAB workspace.

Requirements

  • At least two WARP nodes
  • A PC with MATLAB
  • An Ethernet switch

Getting Started

  1. Install Peter Rydesäter's open-source TCP/UDP toolbox for MATLAB (get it free from MATLAB Central).
  2. Download the WARPLab source code to your PC (get it from the repository). Put the code somewhere in MATLAB's path.
  3. Connect your PC and two WARP boards to a common Ethernet switch. Ideally, nothing else should be connected to the same switch.
  4. Set your PC's IP address to 10.0.0.200
  5. Set the DIP switches on two boards to 0 and 1
  6. Download the WARPLab bitstream (warplab_siso.bit) to both boards (get it from the respository).
  7. Try one of the examples. The GUI (warplab_siso_Gui) is the best one to start with.

Attachments (2)

Download all attachments as: .zip