[[Include(wiki:WARPnet1/version-note)]]

[[TracNav(WARPnet1/TOC)]]

= Running the WARPnet 1.0 Server =

== Hardware Setup ==

 1. Connect all the WARP board to a single Ethernet switch. Any number of boards are supported.
 1. Connect a computer which has all the software installed to the same switch.

== Software Setup ==

As mentioned in the architecture of WARPnet, the system is divided into a server and controllers. The server is the central hub of data transfer and responsible for moving data between the controllers and the nodes. Only one instance of the server needs to be running at any time. Client scripts can be run over and over with restarting the server.

The controllers and server connect using network sockets while the server connects to the nodes by either network sockets (if using a Backdoor Board) or PCAP (if using the main Ethernet connection).

To run the server navigate to the `warpnet_framework` directory. Run the following:
{{{
 python warpnet_server.py pcapInterface controllerPort pcapInterfaceMACaddress
}}}

The `pcapInterface` is the physical interface (eth0, en1, etc.) that the FPGA Boards are connected to over the switch. The `controllerPort` is the port on which the server listens for connections to controllers/clients. The first script will extract the MAC address of the `pcapInterface` and pass it to the server or in the second case you must pass it yourself.