Changes between Version 15 and Version 16 of peripheral_test/sw_setup


Ignore:
Timestamp:
May 24, 2006, 9:43:14 PM (18 years ago)
Author:
bratton
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • peripheral_test/sw_setup

    v15 v16  
    4545 5. Right-click on '''Project: Peripheral Test''' and check '''Mark to Initialize BRAMs'''.  This step tells XPS to update the bitstream with your project.
    4646 6. Right-click on '''Project: Peripheral Test''' and select '''Generate Linker Script'''.  Make sure that each article under the '''Memory''' drop down menus is either set to '''iocm_cntlr''' or '''docm_cntlr'''
    47  6. Choose '''Update Bitstream''' by either accessing it through '''Device Configuration''' on the top menu, or by clicking on the toolbar button (it says "Bram Init" on it).  This process will take 10-15 minutes depending on your computing speed. Longer may indicate an improper setup (esp. Steps 5 & 6 of this section).
     47 6. Choose '''Update Bitstream''' by either accessing it through '''Device Configuration''' on the top menu, or by clicking on the toolbar button (it says "Bram Init" on it).  This process will take 10-15 minutes depending on your computing speed. Longer may indicate an improper setup (esp. steps 4,5,6 of this section).
    4848 7. The file is now ready to download to the board.
    4949