Changes between Version 16 and Version 17 of peripheral_test/sw_setup

Timestamp:

May 24, 2006, 9:49:54 PM (18 years ago)

Author:

bratton

Comment:

--

peripheral_test/sw_setup

@@ -25 +25 @@
    * ''Push_Buttons_4bit''
      * Check '''Use interrupt''' for the Push_buttons_4bit IO device.  IMPORTANT: If you fail to do so now, consult the [wiki:peripheral_test/helpfaq Help Documentation] to learn how to add them once the project is created. 
-   * ''DIPSWs_4bit''
    * ''RS232''
      * Peripheral: ''OPB UARTLITE''
      * Baudrate: ''57600''
    * ''onewire_0''
-   * '''UNCHECK''': ''SysACECompactFlash'', ''Ethernet_MAC'', ''SRAM0_ZBT_512Kx32'', and ''SRAM1_ZBT_512Kx32''
- 9. At '''Add Internal Peripherals''', change the "Memory size" to '''128 KB''' in the drop-down menu under the '''plb_bram_if_cntlr_1''' box. Click '''Next'''
+   * '''UNCHECK''': ''DIPSWs_4bit'', ''SysACECompactFlash'', ''Ethernet_MAC'', ''SRAM0_ZBT_512Kx32'', and ''SRAM1_ZBT_512Kx32''
+ 9. At '''Add Internal Peripherals''', click '''Remove''' in the right of the '''plb_bram_if_cntlr_1''' box. Click '''Next'''
  10. At '''Software Setup''', UNCHECK '''Memory test''' and '''Peripheral selftest'''.  '''RS232''' should be chosen for '''STDIN''' and '''STDOUT'''.  Click '''Next'''. 
  11. If you chose to keep the "Memory test" or "Peripheral selftest" simply click '''NEXT''' through configuration menu(s). Click '''Generate''' at the '''System Created''' window.  Click '''Finish''' to exit the builder.  Click '''OK''' to beging using XPS.