Changes between Version 13 and Version 14 of WARPLab/QuickStart
- Timestamp:
- Mar 14, 2013, 3:17:59 PM (11 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
WARPLab/QuickStart
v13 v14 14 14 15 15 === Hardware Setup === 16 * For your PC: 17 1. Assign one of your NICs to the manual IP address specified in the wl_setup step above (default 10.0.0.250) 18 1. Connect the NIC to a 1Gb Ethernet switch 16 19 * For WARP v3 nodes: 17 1. Connect ETH_A to a 1Gb Ethernet switch20 1. Connect ETH_A to the 1Gb Ethernet switch your PC is connected to. 18 21 1. Set the user DIP switch to a unique value on each node, starting at 0 19 22 1. Configure the FPGA with the reference design. The reference bitstreams are included in the Reference_Bitstreams folder. Unzip {{{download.zip}}} to find {{{download.bit}}} and {{{download.bin}}} (see the [wiki:howto/SD_Config SD config howto] for help using the .bin file).