Version 17 (modified by murphpo, 9 years ago) (diff) |
---|
Examples
This page briefly describes the examples in the M_Code_Examples directory that part of every WARPLab Reference Design Release.
SISO Transmission and Reception Example
File: wl_example_siso_txrx.m
Requirements: 2 WARP v3 kits or 2 WARP v2 kits, 1 antenna each.
This example uses WARPLab 7 to transmit a sinusoid from one WARP kit and receives this sinusoid from another. Additionally, a preamble is attached to the beginning of this sinusoid "payload" that can optionally be used by the Automatic Gain Control (AGC) functionality of the receiver to set gains. AGC mode is enabled by a variable at the top of the script called USE_AGC.
MIMO Transmission and Reception Example
File: wl_example_mimo_txrx.m
Requirements: 2 WARP v3 kits or 2 WARP v2 kits, 2 antennas each.
This example is nearly identical to the SISO example, except that both RF interfaces are used to transmit and receive. We send two different frequency sinusoids -- one from each transmit antenna, and receive the superposition of those sinusoids on both receive antennas.
OFDM Comm Example
Please see SISO OFDM Example for details and code.
Synchronized Nodes Example
Please see Synchronized Nodes Example for details and code.
Multi-Node Array Example
Please see 8x2 Multi-node Array for details and code.
Spectrogram Example
Please see Spectrogram Example for details and code.
User Extension Example
Please see EEPROM User Extension for details and code.